703915

Easymaxx Z02927 Manual

22
Zoom out
Zoom in
Previous page
1/52
Next page
22
Setting the Thread Tension
Test the type of stitch ideally using a piece of fabric which you later want to machine.
• For heavy fabric, for example, a lower thread tension is required. If the stitches are too tight,
the thread tension has been set too high. Turn the thread tension regulator (1) anticlockwise
to ease the tension.
• With light fabrics, a higher thread tension is required. If the stitches are too loose, the thread
tension has been set too low. Turn the thread tension regulator clockwise to increase the
tension.
Sewing
Start of Sewing
CAUTION!
❐ Make sure that the threads are correctly threaded! Incorrect thread guidance can cause the
thread to rip, stitches can be missed, or the fabric may curl along the seam. Under some
circumstances, the device might be damaged.
❐ Practise fi rst on a scrap piece of fabric before you start the actual sewing. Check the thread
tension.
❐ The thread and fabric must be inserted in the sewing machine correctly before you activate
the On/Off switch (4). Once you activate the On/Off switch, the machine starts sewing
immediately.
❐ Danger of injury! Keep fi ngers away from all moving parts. Special care should be taken in
the area of the sewing needle.
❐ Do not leave the device switched on for longer than 10 seconds without interruption. Pause
for around 5 seconds before you switch it on again.
You can use the hand-operated sewing machine to sew fabrics with the straight stitch.
1. Make sure that the On/Off switch (4) is as far as it will go in the
"Aus" (off) position.
2. Raise the needle to its highest position by turning the hand-
wheel (7).
3. Raise up the fabric clamp (12), place the fabric to be machined
between the fabric clamp and the needle plate (11) and lower
the fabric clamp. PLEASE NOTE: During sewing, the fabric
will be transported to the left. This is why it must be placed into
the sewing machine at the left end.
4. Pull the threaded yarn (see the "Threading" section) out around
5 cm.
On Off
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Easymaxx Z02927 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Easymaxx Z02927 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info