515345
29
Zoom out
Zoom in
Previous page
1/32
Next page
29
11.2 Siren EA-SIR-RJ45
Primary voltage 230 VAC / 50 Hz
Secondary voltage: 12 VDC 3 VA
Dimension: 120 x 65 x 77mm (L x W x H)
Weight: 200 g
Length of cable: 3 m
Installation: connect in place of the BBT-DC12S-RJ45 AC-adapter
Functions:
A) periodical ton of the siren (during inactive waiting period)
B) in case of an alarm in listening-in connection, the siren can be activated permanently
C) the siren can be switched on/off during phone connection by entering DTMF 6 / DTMF 4 .
11.3 230V-Switch EA-SWI-RJ45
Same as EA-SIR-RJ45, but instead of the siren a 230VAC load (f.e. a light) can be switched on/off during connection.
Output cable with Euro-jack-connector with maximum load of 2.5A.
Activation of output:
A) Output is activated automatically, as soon as an alarm criteria is fulfilled (siren, floodlight)
B) Output is activated automatically, if an alarm remains unacknowledged (siren, floodlight)
C) Output is activated during phone connection by request (siren, floodlight)
11.4 DIN-Adapter interface EA-ACDC-SWI-RJ45
Primary voltage: 230 VAC / 50 Hz
Secondary voltage: 12 VDC / 150 mA (no load < 17.5 V)
Safety label: EN60950, 1992
Dimension: 52.5 x 93 x 68.5mm (L x W x H)
Weight: 250 g
Connection: Screw terminal
Relay output: max. 2A / 1000 VA (make contact)
Optocoupler input: 10..230 V (AC or DC) => sensor 1
Dimensions: 120 x 65 x 42 (L x W x H)
Cable: 3m (RJ45)
Weight: 500 g
Installation: connect in place of the BBT-DC12S-RJ45 AC-adapter
Activation of output:
A) Output is activated automatically, as soon as an alarm criteria is fulfilled (siren, floodlight)
B) Output is activated automatically, if an alarm remains unacknowledged (siren, floodlight)
C) Output is activated during phone connection by request (siren, floodlight)
D) Operation as a remote-controlled system (remote switching of heater, engines and so on)
E) many more applications are possible
Remote Switching procedure:activation of output DTMF 6 / deactivation of output DTMF 4
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for EasyAlarm CONTROL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of EasyAlarm CONTROL in the language / languages: English as an attachment in your email.

The manual is 0,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of EasyAlarm CONTROL

EasyAlarm CONTROL User Manual - German - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info