515344
9
Zoom out
Zoom in
Previous page
1/32
Next page
9
Program calling number(s) Details according to section 6.1
6. Slide function switch to PROG
7. Enter * * <n> (selected calling number: Standard n = 1..9)
Corresponding calling number will be announced, followed by message “to modify press star“
8. Press * and enter calling number
9. Slide function switch to OFF
Select user language / record individual message Details according to section 6.3
10. Slide function switch to PROG
11. Enter *. *. #.
Current individual message will be announced followed by “to modify press * , to stop press #
12. Select language for user announcements: (facultative)
Press key 1 to 4 to select user languages: 1 for German, 2 for French, 3 for English GB, 4 for Italian
13. Press *. and start speaking
14. Press #. to finish recording, max. duration is 12 seconds
New individual message will be announced. You can repeat steps 15 to 16 until text is fine!
15. Slide function switch to OFF
Program PIN-code Details according to section 6.4
16. Slide function switch to PROG
17. Press key #.
You can prevent the alarm unit from unintended re-programming by pressing *. ..
18. Enter PIN-code (4 to 7 digits)
19. Press key #.
20. Re-enter PIN-code for confirmation
21. Press key #.
New PIN-code will be announced
22. Slide function switch to OFF
Alarm unit is now ready for operation Details according to section 7
23. Slide selection switch to the requested position (I/II/III)
4.2.3 Test mode for sensor contacts
You can test the wiring as following:
1. Slide function switch to PROG
2. Enter *. *. *. *.
Any time a monitored sensor contact changes to alarm state you will hear the announcement”<n> activated”.
If the contacts changes to idle state you will hear “<n> deactivated.
3. Slide function switch to OFF
Notes:
<n> = 1/2/3 (depending on sensor)
Only sensors with contact type other than inactive (00) will be announced => see configuration in section 5.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for EasyAlarm BASIC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of EasyAlarm BASIC in the language / languages: English as an attachment in your email.

The manual is 0,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of EasyAlarm BASIC

EasyAlarm BASIC User Manual - German - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info