515344
5
Zoom out
Zoom in
Previous page
1/32
Next page
5
3. SET VIEW / FUNCTION ELEMENTS
1. Function switch
Position Information
OFF Device is switched off
PROG Entering of calling numbers, calling number sequence, PIN-Code and further parameters
ON Device is in supervision mode
2. Selection switch
EasyAlarm
®
monitors depending on the position of the selection switch
Position Monitoring functions (Function switch on position ON)
I Wired sensor-1 enabled. Acoustical monitoring disabled!
II Wired sensor-1 enabled. Acoustical monitoring disabled!
III Wired sensor-1 enabled. Acoustical monitoring enabled with highest sensitivity => Alarm is triggered if
noise level is exceeded two or three times within a short period
Note: Monitoring functions can be modified individually according to section 5.4ff!
3. Keypad
When function switch is on position PROG, you can enter the calling numbers or do further programming. If function
switch is on position ON pressing any key will start a test call.
Keys are marked with 1 2 3 4 5 6 7 8 9 * 0 # .in the following sections.
4. Loudspeaker
The integrated loudspeaker is used for voice guidance during the programming as well as for hands-free communication
during phone connection.
5. Microphone
Is used during hands-free connection and for recording of individual message.
6. LED
Status of LED Operation mode
Green Waiting period
Green brief flashing every 4 seconds, also if acoustical
monitoring is active by exceed set noise level
Supervision mode activated
Green is on and off for 4 seconds alternatively Supervision mode deactivated
Orange Phone connection
7. Battery compartment
The 9V-battery is used as a backup during power failure.
Please note: The telephone cord must be disconnected before opening the battery
compartment because otherwise you can get in contact with the telecommunication voltage!
8. Telephone jack (-LINE)
The plug must be locked in the jack. To disconnect press pawl.
9. External ports (EXT/≂) for accessories (as motion sensor) and power supply.
6
1
5
4
3
2
-LINE
EXT/
~
7
9
8
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for EasyAlarm BASIC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of EasyAlarm BASIC in the language / languages: English as an attachment in your email.

The manual is 0,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of EasyAlarm BASIC

EasyAlarm BASIC User Manual - German - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info