Manual Easy Threed Nano (page 3 of 11) (English)

772472

Zoom out

Zoom in

1/11

1 Un-Boxing NANO 3d printer

1, Lift The NANO from its packaging box. Remove all bubble wrap, foam and tape (may require

scissors).

2, Inside The NANO is an NANO 3d printer and an accessories box with a user manual, 3D filament,

USB Cable, power adapter, SD card, SD card reader, scraper, filament holder and screw driver.

3, Be sure to remove the ”Gantry Clips” located on the front left and front right corners of the

printer. The clips are only for protection during transportation. (As shown in figure 1)

(figure 1)

4, Place the filament holder at the left or right side of the printer, then attach the filament on the

side (As shown in figure 2)

Precaution: Do not place the filament holder at the front or back of the printer, which will affect

the printing quality.

(figure 2)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Easy Threed Nano in the language / languages: English as an attachment in your email.

The manual is 0.44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Easy Threed Nano Manual

Product: