772488

Easy Threed Mars - ET2000 Manual

10
Zoom out
Zoom in
Previous page
1/15
Next page
QUICK START GUIDE
８|P a g e
clockwise then platform goes down, screw anti-clockwise then platform goes up),
(4)Choose the following 4 points to check and adjustment.
(4.1) Adjust Point A, pull the extruder gently in X axis to point A(above), then observe the distance between platform and
nozzle, its the thickness of a piece of A4 paper, if the distance is too big, then needs to rotate (anti-clockwise) its below
screws to make platform up, if the distance is too small, then needs to rotate(clockwise) its below screws to make platform
down.
(4.2) Adjust Point B, After well adjust point A, then to pull the extruder gently in X axis to Pint B(above), then observe the
distance between platform and nozzle, its the thickness of a piece of A4 paper, if the distance is too big, then needs to
rotate (anti-clockwise) its below screws to make platform up, if the distance is too small, then needs to rotate(clockwise)
its below screws to make platform down.
(4.3) Adjust Point C, After well adjust point A, then to pull the extruder gently in Y axis to point C(Above). then observe the
distance between platform and nozzle, its the thickness of a piece of A4 paper, if the distance is too big, then needs to
rotate (anti-clockwise) its below screws to make platform up, if the distance is too small, then needs to rotate(clockwise)
its below screws to make platform down.
(4.4) Adjust Point D, After well adjust point D, then to pull the extruder gently in Y axis to point C(Above). then observe
the distance between platform and nozzle, its the thickness of a piece of A4 paper, if the distance is too big, then needs to
rotate (anti-clockwise) its below screws to make platform up, if the distance is too small, then needs to rotate(clockwise)
its below screws to make platform down.
(4.5) After 4 points all well adjust, then to pull the exturder in X and Y axis to observe if the distance between platform and
the nozzle is the same.
D13. How to assemble the filament holder?
(1) Takes the filament accessories out from the box to assemble the filament holder (as below,there are 2 side panels, 1
base, 2 M3 screws, 2 nuts, 1 bridge
A4 Paper
Print head
Glass platform
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Easy Threed Mars - ET2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Easy Threed Mars - ET2000 in the language / languages: English as an attachment in your email.

The manual is 1.12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info