772488

Easy Threed Mars - ET2000 Manual

15
Zoom out
Zoom in
Previous page
1/15
Next page
QUICK START GUIDE
１３ |P a g e
A1, Mistake of slicing, re-slice, Or the software to reproduce GCode printing.
A2,The model drawings problem. If the model still misplaced after re-slicing the models, then its drawing has problem.
A3, the nozzle is forced to stop printing Path:
First, You can not touch the moving nozzle with your hands during the printing process. S
A4, motherboard problem:
If the above problems can not solve the dislocation, and if all dislocation happens at the same height of any model then
replace the motherboard. There is big gap between actual and theory printing accuracy
Q4, There has lots of filament piled up on the model surface,
A1, nozzle temperature is too high, consumables melt too fast to cause overflowing .
A2, The filament flow is too large, Software has filament flow settings, the general default value is 100%. Please down it
to 80% printing.
Q5, Poor surface after removing the support of FDM printing technology.
A1, The support can be set up to the 10% density. Then its easy to remove the support.
A2, can be slightly trimmed with a grinding tool, and then rubbed with a towel which dipped into acetone. Note to Wear
gloves, do not wipe too long so could avoid affecting the appearance and size of the model.
Q6, The inappropriate distance between the platform and nozzle.
The first layer is not formed because of large distance, if the distance is too small, the nozzle will scratch the
platform, . The distance between the nozzle and the platform must be adjusted to get through a calibrate film.
Q7. Printing supplies difference:
With the maturity of 3D printing, FDM printing supplies on the market is rich and multiple color, But the compatibility of
supplies and printers is particularly important.
Thank you for choosing EasyThreed 3D Printer!
Shenzhen EasyThreed Technology Co., Ltd.
Website: http://www.easythreed.com
Tel: 86-755-89882011
Address: No. A2, 2nd Floor, Avant Low Carbon Innovation Park,
No1034 of Longgang Road, Pingdi Street, Longgang District, ShenZhen,China
… 15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Easy Threed Mars - ET2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Easy Threed Mars - ET2000 in the language / languages: English as an attachment in your email.

The manual is 1.12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info