755509
33
Zoom out
Zoom in
Previous page
1/64
Next page
11
EN
5.2.4 Video output
Depending on your TV set you can change the Video output
signal for SCART connections.
[CVBS]: CVBS output.
[RGB]: RGB output.
5.3 Channel Search
To access the menu, press MENU and select
[Search Channel]. The Menu provides options to adjust the
Search Channel settings. Select an option and press / to
adjust the settings. Press EXIT to exit the Menu.
5.3.1 Satellite
Configure the settings of satellites.
Satellites' list: Press / to select a satellite, whose settings will be shown at right side.
LNB Type: Press //OK to show the list of LNB Types which is shown as frequencies of local oscillator.
You also can enter frequency by User Single, User Dual at bottom of the list.
LNB Power: Press /to set the LNB power.
22K: Press /to switch on or off the 22K,which is set with auto when LNB Type is dual local oscillator.
Toneburst: Enable or Disable the toneburst switcher.
DiSEqC1.0: select the right port up to 4 for the right LNB.
DiSEqC1.1: select the right port up to 16 for the right LNB.
Motor: Press LEFT/RIGHT to select DiSEqC1.2 or DiSEqC1.3. Then Press OK to
show the menu to set position.
DiSEqC1.2: Move the motor to a right position to lock the signal.
DiSEqC1.3: Move the motor according to the local and satellite positions.
Motor Settings: (Select DiSEqC and press OK to open)
Move Auto: Press LEFT/RIGHT to start to move West/East. It will be stopped automatically
when the signal is locked.
Move Continue: Press LEFT/RIGHT to start to move West/East. It will keep moving until you
stop it.
Move Step[1]: Press LEFT/RIGHT to move just a step.
Store Position: store current position of motor.
Goto Position: Press LEFT/RIGHT to goto the position stored.
Goto Reference: Rest all the positions.
Goto X: goto the position calculated from the local and satellite positions.
DYON COBRA
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dyon Cobra D840016 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dyon Cobra D840016 in the language / languages: German as an attachment in your email.

The manual is 6,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info