667482
48
Zoom out
Zoom in
Previous page
1/58
Next page
43
XTL
®
300
User Guide
Troubleshooting
Review the following if you encounter a problem with your label maker.
Problem/Error Message Solution
Poor print quality
Attach the power adapter to the label maker to recharge
the battery. See Charging the Battery on page 2.
Clean the print head. See Cleaning the Print Head on
page 41.
Ensure the label cartridge is inserted properly.
Replace the label cartridge.
Labels wrapped around roller
in label exit slot
Do not attempt to disassemble the label maker. Contact
DYMO Customer Care for instructions
(http://support.dymo.com).
Labels running low
Label cartridge empty
You are about to run out of labels.
Replace the label cartridge. Printing will resume from the
last complete label printed.
Poor cutter performance
Clean the cutter blade. See Cleaning the Cutter Blade
on page 42.
Label maker does not turn on
Press and hold key for at least five seconds.
Ensure the power adapter is connected to a working
wall outlet.
Attach the power adapter to the label maker to recharge
the battery. See Charging the Battery on page 2.
Cover is open The label cartridge cover is open.
Close the label cartridge cover to continue printing.
Label cartridge is missing No label cartrdige is detected in the label maker.
Insert a label cartridge.
If label cartridge is inserted, see Label cartridge not
recognized.
Label cartridge not
recognized
Make sure that the label cartridge is compatible with the
label maker and is inserted correctly.
Make sure the contacts in the label maker and the
electronic chip on the label cartridge are free of dirt. See
Cleaning the Sensors on page 42.
If necessary, clean the electronic chip on the side of the
label cartridge with a small amount of alcohol on a
cotton swab.
Label application - cartridge
mismatch
This error can occur for several reasons:
The label cartridge in the label maker is not appropriate
for the label application you are trying to use.
The label you are trying to print cannot be printed on this
label cartridge.
The label cartridge in the label maker does not match
the label you are trying to print. In this case, you can
continue printing but the results may not match the label
you see in the label editor.
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dymo XTL300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dymo XTL300 in the language / languages: English as an attachment in your email.

The manual is 12,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Dymo XTL300

Dymo XTL300 Quick start guide - English - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info