585220

Dymo Rhino 4200 Manual

12
Zoom out
Zoom in
Previous page
1/21
Next page
11
6 Press .
Each breaker is separated by a line in the display.
7 Enter the text for each breaker in the label.
Press and to move from breaker
to breaker.
By default, a separator line is printed between each cell
on a breaker label. To turn off the separator lines, see
Printing Separator Lines between Cells on page 15.
To create data for the breakers automatically, see
Creating a Series of Labels on page 12.
Creating Module Labels
A module label is a multi-cell label used
to label a row of modules of varying
widths. You set the width of a module
and the number of modules, enter the
text for each module, and print. You
can use multipliers to adjust the width
of individual modules as necessary.
To create a module label
1 Press + .
2 Select the module length and press .
Select the length that applies to the smallest size
module. You can then use multipliers to increase the
size of individual modules that are larger. The default
module length is 17.5 mm (0.5”).
3 Select the number of modules and press .
4 Select the multiplier for each module and
press .
5 Select one of the following:
• On to print empty modules at the end of the label.
• Off to not print empty modules at the end of
the label.
6 Press .
Each module is separated by a line in the display.
7 Enter the text for each module.
Press and to move from module
to module.
By default, a separator line is printed between each cell
on a module label. To turn off the separator lines, see
Printing Separator Lines between Cells on page 15.
To create data for the modules automatically, see
Creating a Series of Labels on page 12.
Changing the Label Type
Once you create a label using one label type, you can
easily change the label type without losing your data.
If the data from one label type will not fit in the new label
type, the text that will not fit is shaded in the display.
When you change from a multi-cell label, such as a
breaker label, to a single cell label, such as general or flag,
each cell becomes a new label. All blank cells are deleted.
When you change from a multi-cell label type to
another multi-cell label type, make sure the new label type
contains the same number of cells.
To change the label type
1 Press the Hot Key for the new label type.
2 Make any necessary adjustments to the settings for
the new label type.
Using Barcodes
The printer can generate Code 39 and Code 128
barcodes. You can add a barcode to the following
label types:
Barcodes cannot be printed on 6 mm (1/4”) labels.
The barcode prints horizontally along the label. You can
choose to print the barcode text in small print either
below or above the barcode. Optionally, you can add text
before and after the barcode and serialize barcodes.
Adding a Barcode
The barcode text appears on the label in the display just
like any other text. If the cursor is positioned within the
barcode text, the type of barcode and the position of the
barcode text are displayed in the caption bar.
To add a barcode
1 Do one of the following:
• To add a Code 39 barcode, press .
• To add a Code 128 barcode, press
+.
2 Enter the text for the barcode within the barcode on
the display and press .
3 Select whether or not to show the barcode text and
press .
4 If necessary, select the location for the barcode text
and press .
The barcode appears as text in the display.
Editing a Barcode
You can edit the text for an existing barcode.
To edit a barcode
1 Press .
A message appears asking if you would like to edit
the barcode.
2 Press .
The text of the existing barcode is displayed.
3 Edit the barcode text and press .
General Flag
Fixed length Module
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dymo Rhino 4200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dymo Rhino 4200 in the language / languages: English as an attachment in your email.

The manual is 14,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Dymo Rhino 4200

Dymo Rhino 4200 User Manual - German - 22 pages

Dymo Rhino 4200 User Manual - Dutch - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info