Manual Dymo Rhino 4200 (page 11 of 21) (English)

585220

Zoom out

Zoom in

1/21

Creating Multi-Line Labels

You can print a maximum of five lines on a label.

The number of lines you can print on a label depends on

the label width you have selected.

The display only shows one line of text at a time. Use the

navigation keys to scroll through multiple lines.

To create a multi-line label

1 Enter the text for the first line, and press

2 Enter the text for the next line.

3 Repeat these steps for each additional line.

Using International Characters

The printer supports the extended Latin character set

using RACE technology. Similar to using a mobile phone

keypad, holding down a letter key will display all the

variations of that letter.

For example, if French is selected as the language and

you hold down the letter a, you will see à á â ã ä å and

so on through all the variations available. The order in

which the variations appear depends on the language

you have selected.

Creating Industrial Labels

You can quickly create labels for special industrial

applications, such as wire/cable wrap, flag, breaker, or

module. You can also create a fixed length label. Hot

Keys are available for each of the label types.

The current label type is displayed in the Caption bar. By

default, the label type is General with no special

formatting, text center aligned, and the length

automatically determined by the amount of text.

Pressing a Hot Key always changes the current label type

to the selected label type. For example, if you choose Flag

and later want a General label, press the General key to

remove the Flag settings and return to General label type.

See

Using Custom Defaults

on page 12 for information

about setting up custom defaults for each label type.

Creating Fixed Length Labels

Normally, the length of the label is determined by the

length of the text entered. However, you may want to

make a label for a specific purpose that is a fixed length

regardless of the length of the text.

The default fixed length is 25 mm (1.0”). Any change you

make to the fixed length setting remains in effect until you

change the setting.

To set the label length

1 Press + .

2 Select the length of the label and press .

Any text that does not fit within the fixed length appears

shaded in the display and will not print.

Creating Wire/Cable Labels

A wire/cable label is placed around a

wire or cable. The label text is repeated

as many times as possible depending

on the size of the text and the width or

length of the label.

To create a wire/cable label

1 Press .

2 Enter the diameter of the cable and press .

To create multiple labels quickly, see Creating a Series

of Labels on page 12.

Creating Flag Labels

A flag label wraps around a wire or

cable leaving the text part of the label

extending out from the cable. The text

on a flag label is automatically printed

on both ends of the label, leaving a

blank space in the middle that wraps

around the cable. When the label is

applied to the cable, both ends of the label are applied

back to back leaving a tail or flag. The result is a label that

can be read from both sides.

To create a flag label

1 Press + .

2 Select the flag type and press .

3 Do one of the following:

• Select the length for the flag portion of the label.

•Select AUTO to have the length for the flag

portion automatically determined by the amount

of text.

4 Press .

To create multiple labels quickly, see Creating a Series

of Labels on page 12.

Creating Breaker Labels

A breaker label is a multi-cell label used

to label a row of breakers. You select

the breaker height and number of

breakers, enter the text for each

breaker, and print. The result is a long

label with a text for each breaker.

To create a breaker label

1 Press .

2 Select the breaker height and press .

The default breaker height is 25 mm (1.0”).

3 Select the number of breakers and press .

4 Select the number of poles for each breaker and

press .

5 Select one of the following:

• On to print empty breakers at the end of the label.

• Off to not print empty breakers at the end of

the label.

Label

Width

6 mm

(1/4”)

9 mm

(3/8”)

12 mm

(1/2”)

19 mm

(3/4”)

# Lines 1335

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dymo Rhino 4200 in the language / languages: English as an attachment in your email.

The manual is 14,27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Dymo Rhino 4200

Dymo Rhino 4200 User Manual - German - 22 pages

Dymo Rhino 4200 User Manual - Dutch - 22 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dymo Rhino 4200 Manual

Product: