Dutch Originals DO-CE-WL02-W - DIGITAL SUNRISE ALARM CLOCK II Manual
5
Zoom out
Zoom in
Previous page
1/28
Next page
5EN
TO SET THE DESIRED FM PRESET
Press the alarm 2 button (6) three times to set the desired FM pre-set.
Press the – (3) or + button (5) to select one of the desired FM pre-sets.
On the display (9) will be shown ‘CH xx’ (xx stands for the number of selected FM preset). Confirm the set FM preset by pressing the alarm 2 button (6).
SUNRISE
When the alarm is enabled, the device will start 30 minutes before the set alarm by gradually lighting up to a maximum brightness at the set alarm.
When the alarm goes o, the light is at maximum brightness and the FM pre-set will sound.
Note! In case the set alarm is set less than 30 minutes before the actual time, the lighting up function will not be enabled.
To cancel the alarm, press the alarm 2 button (6) for ± 2 seconds. The light and FM pre-set will switch OFF. The ‘alarm 2’ icon will no longer light up on the display
(9).
SNOOZE
To snooze the alarm, press the snooze button (8) when the alarm goes o, the light and sound of the device will turn o.
The alarm will sound again after 9 minutes. Gradually the light will light up till maximum brightness until the alarm sounds again.
When the device is in snooze mode, the icon of the set alarm (alarm 1 and/or 2) will flash on the display (9).
To cancel the day’s alarm, when the alarm goes o press alarm 1 and/or 2, the light and sound of the device will turn o. But next day the alarm goes o again at
the set time(s).
Note! The device will enter the snooze mode automatically if the alarm sounds for 3 minutes without any operation.
Note! The device can be snoozed for a maximum of 4 times!
Note! A tone will sound indicating the device is in snooze mode, only when it was in BT mode!
LIGHT MODE
The device is equipped with dierent light modes.
WHITE MODE
Press the light button (4) to switch ON the light.
Adjust the brightness of the white light with the – (3) or + button (5).
COLOUR MODE
Press the light button (4) again to change the light from white to colour mode.
In colour mode, 6 dierent colours will automatically fade in and out from: red -> purple -> blue -> turquoise -> green -> yellow -> ...
By pressing the – (3) or + button (5) in colour mode, you can also cycle through colour mode as solid colours: red -> green -> blue -> purple -> yellow ->
turquoise -> o.
SUNSET MODE
In sunset mode the light will gradually decrease brightness, until the light is fully switched o.
There are 3 sunset modes (30, 60 & 90 minutes).
Press the sunset button (7) to activate sunset mode.
The ‘sunset’ icon and ‘30’ will light up in the display (9). You can adjust the timer by pressing the sunset button (7) to the desired timer setting
(30 -> 60 -> 90 ->). To cancel sunset mode, press and hold the sunset button (7).
Note! When playing music in one of the selected modes, the music will be switched OFF, when the set time is elapsed.
MAKING A BT CONNECTION PAIRING
• When the device is powered ON, press the power/mode button (12)
two times, a tone will sound and the ‘BT’ icon will flash, indicating it is in pairing mode.
• Keep the device and your BT enabled appliance within 1 metre (3 ft) of each other during the pairing process. ¬
• Make your mobile phone, tablet or other BT enabled appliance search for compatible BT devices. (Make sure the BT function is turned ON).
• When your BT enabled appliance finds the device, select “DO-CE-WL02-W” from the list of found devices.
• A tone will sound to indicate successful pairing. The ‘BT’ icon on the display (9) will stop flashing.
• If a paired BT enabled appliance is in range, the device will connect automatically if it is in BT mode.
NOTE!
If you would like to connect the device to another BT enabled appliance, you must first disconnect it from the active paired BT enabled appliance. Go to your BT
enabled appliance’s settings, select “DO-CE-WL02-W”, and select “disconnect” or “unpair”. You can also simply switch o the BT function. When the device has
been unpaired and/or does not have an active paired BT connection, repeat the pairing process with the (new) BT enabled appliance you want to connect to the
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Dutch Originals DO-CE-WL02-W - DIGITAL SUNRISE ALARM CLOCK II at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Dutch Originals DO-CE-WL02-W - DIGITAL SUNRISE ALARM CLOCK II in the language / languages: English, German, Dutch, French as an attachment in your email.
The manual is 3.74 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
