650115
11
Zoom out
Zoom in
Previous page
1/36
Next page
20 21
1. Slacken the retaining screws on
the back using a screwdriver, lay the
apparatus on its back and remove the
screen.
Note
The two brackets on the front of the
screen will become loose when the
screws are slackened. Take care not
to lose them, or the screen cannot be
rettedcorrectly.
2. Cut the cable ties and bend the
tube’stwotransparentretainingclips
by pulling them gently upwards.
Note
Cable ties are used for transport
protection only.
3. Carefully pull the tube up over the
housing rim (1) and out of the housing,
then sideways out of the frame (2).
4. When inserting the tube, following
these instructions in reverse order.
2
1
1
The light tubes contain a small amount of mercury sealed within the glass
tubing, when a tube breaks in your home, some of this mercury is released as
mercury vapor. To minimize exposure to mercury vapor, we recommend that
users follow the cleanup and disposal steps as follows:
Before Cleanup:
- have people and pets leave the room and air out the room for 5-10 minutes
by opening a window or door to the outdoor environment.
- Shut off the central forced air heating/ air-conditioning system, if you have
one.
- Collect material needed to clean up broken tube, just like: stiff paper or
cardboard, sticky tape, damp paper towels or disposable wet wipes.
During Cleanup:
- Vacuuming is not recommended unless broken glass remains after all other
cleanup steps have been taken. Vacuuming could spread mercury-containing
powder or mercury vapor.
- Be thorough in collecting broken glass and visible powder.
- Place cleanup materials in a sealable container.
After Cleanup:
- Promptly place all bulb debris and cleanup materials outdoors in a trash
container or protected area until materials can be disposed of properly. Avoid
leaving any bulb fragments or cleanup materials indoors.
- If practical, continue to air out the room where the bulb was broken and leave
the heating/air conditioning system shut off for several hours.
Cleaning Up a Broken Tube
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Duronic SADV1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Duronic SADV1 in the language / languages: English, German, French as an attachment in your email.

The manual is 1,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info