612056
20
Zoom out
Zoom in
Previous page
1/52
Next page
Operating instructions
18 Operating manual H867 Version 00.0 - Last updated: 01/2012
Switch on the sewing machine.
Press the foot pedal forwards.
The machine sews and winds the looper thread from the thread reel onto
the bobbin.
When the bobbin is full, the machine automatically stops winding. The
bobbin lever moves down.
The cutter is automatically moved into its basic vertical position.
Pull off the full bobbin.
Tear off the thread behind the cutter.
Insert a full bobbin in the looper (see Section 7.6 Replacing the looper
thread bobbin).
Repeat the winding-on procedure with an empty bobbin, as described
above.
7.6 Replacing the looper thread bobbin
Figure 11: Replacing the looper thread bobbin
Lift the looper flap (1).
Remove the empty bobbin.
Insert a full bobbin: insert the bobbin in such a way that it moves in the
opposite direction of the looper.
Guide the looper thread through the 1st looper slot (2).
Damage to the sewing feet or needle plate possible if the
thread is wound on without material.
Lock the sewing feet in place in the highest position and adjust the
sewing foot stroke to the smallest value if you wind on thread with-
out sewing material.
ATTENTION
Risk of injury by the needle point and moving
parts.
Switch off the sewing machine before replacing the
looper thread bobbin.
WARNING
w
e
r
t
q
(1) - Looper flap
(2) - 1. looper slot
(3) - Looper spring
(4) - Looper flap guide
(5) - 2. looper slot
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler H867 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler H867 in the language / languages: English as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler H867

Durkopp Adler H867 User Manual - German - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info