612056
19
Zoom out
Zoom in
Previous page
1/52
Next page
Operating instructions
Operating manual H867 Version 00.0 - Last updated: 01/2012 17
Figure 9: Winding on the looper thread - part 1
Insert the thread from the rear to the front through the right hole in the
1st thread guide (1).
Insert the thread in a wavelike manner through the 3 holes of the
2nd thread guide (5): from top to bottom through the left hole, from
bottom to top through the hole in the middle and finally from top to bot-
tom through the right hole.
Guide the thread clockwise around the looper thread winding
tensioner (4).
Insert the thread in a wavelike manner through the 2 holes of the
looper thread guide (2): from bottom to top through the left hole and
from top to bottom through the right hole.
Guide the thread to the winding bobbin (3).
Figure 10: Winding on the looper thread - part 2
Clamp the thread behind the cutter (1) and tear off the loose end
behind it.
Fit the bobbin on the winder (2).
Turn the bobbin clockwise until it clicks.
Pull the bobbin lever (3) up.
The looper thread is normally wound on when sewing is in progress. How-
ever, you can also wind on the looper thread without sewing material,
e.g. if you require a full bobbin in order to start sewing.
1234
+
+
+
+
5
6
4
1
2
9
q
w
e
r
t
(1) - 1. thread guide
(2) - Looper thread guide
(3) - Bobbin winder
(4) - Looper thread winding tension
(5) - 2. thread guide
q
w
e
(1) - Cutter
(2) - Winder
(3) - Bobbin lever
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler H867 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler H867 in the language / languages: English as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler H867

Durkopp Adler H867 User Manual - German - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info