612049
21
Zoom out
Zoom in
Previous page
1/36
Next page
6. Control unit and operating panel
CAUTION:
These operating instructions describe
only
the functions of
the buttons and the change of parameters by the operator.
For a detailed description of the control unit please see the
current operating instructions of the motor manufacturer
(supplied).
6.1 General
The control unit is programmed and the seam functions set with the control-unit buttons
or the operating panel (for programming see motor manufacturer’s manual).
Depending on the seam required, sewing can be executed manually or by
seam-programming (only with the operating panel).
Three different seam cycles can be programmed for various sewing requirements, in
which the various functions (starting bar tack, ending bar tack, stitch count, thread
cutting etc.) and parameter values (stitch rate, seam length, rpm etc.) are individually
assigned.
Entry is carried out in programming mode.
The parameters and the values assigned are displayed.
The seam programs are not lost even when the sewing machine is switched off (battery
buffer).
In order to avoid the inadvertent alteration of pre-set functions, operation is divided into
various levels (operator, technician).
The operator (seamstress) can program directly.
Access to the technician level is contingent on the entry of a code number (EFKA) or on
switching on the main switch by simultaneously holding down two buttons (QUICK).
RESET
If the control unit is hopelessly misadjusted, this function allows the technician to reset
all adjusted values to their default (ex-works) settings.
This function is described in the Servicing instructions.
23
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler b69 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler b69 in the language / languages: English as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info