612049
11
Zoom out
Zoom in
Previous page
1/36
Next page
5.3 Adjusting the needle-thread tension
Pre-tensioning mechanism (subclass 69-FA-373)
On subclass
69-FA-373
the needle thread needs to be under residual tension for the
thread cutter to function reliably when the main tensioner 2 is open.
This residual tension is created by the pre-tensioning mechanism 1.
The pre-tensioning mechanism 1 also determines the length of the needle-thread end
after the thread has been clipped.
The pre-tension 1 should be set lower than the main tension 2.
Adjust pre-tensioning mechanism 1 by turning the knurled nut.
After major changes to preliminary tension 1 the main tension 2 should also be
adjusted accordingly.
Main tension
The main tension 2 should be set as low as possible.
The looping of the threads must be in the centre of the material (see fig. a).
With thin material excessive thread tension can cause unwanted gathering and thread
breakage.
Adjust the main tensioner 2 so that the stitches are uniform.
5.4 Opening the needle-thread tensioner
Automatic
The main tensioner 2 is opened automatically:
when the thread is severed (subclass
69-FA-373
).
when the foot is raised (pedal 1 position backwards)
Manual
The main tensioner 2 is opened manually:
when the release lever 3 is pressed towards the arm.
The main tensioner 2 remains open for as long as pressure is maintained on the
release lever 3.
when the sewing feet are raised mechanically with the knee lever (see chapter 5.9).
when the sewing feet are locked in the raised position (see chapter 5.10).
13
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler b69 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler b69 in the language / languages: English as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info