612070
56
Zoom out
Zoom in
Previous page
1/68
Next page
6.2.4 Setting of machine positioning with VD552/6F82FA drive
The synchronizer contains one internal disc with increments
(generator) for the speed regulation, one central adjustable
diaphragm (1) to set the 1st needle position, and one marginal
adjustable diaphragm (2) to set the 2nd needle position.
Caution!
At the position setting it is necessary to proceed with extreme caution!
Danger of injury!
At handling be sure that the diaphragms and generator disc are not
damaged.
Caution!
At the setting of the positioning diaphragms the network switch must
be switched off unconditionally!
The direction of the drive rotation is already set correctly.
After loosening the screw remove the speed sensor cover.
By the key S5 (on the control box) select the needle lower position
(LED 7 illuminates).
Tread the pedal forwards shortly.
Check the 1st position of the needle.
If the needle is not in the 1st position, the central diaphragm for the
1st position (with the main switch switched off) must be turned in
the required direction.
Repeat the procedure until the 1st position is set correctly.
Switch on the network switch.
By the key S5 (on the control box) select the needle upper position
(LED 8 illuminates).
Tread the pedal forwards shortly.
Check the 2nd position of the needle.
If the needle is not in the 2nd position, the marginal diaphragm for
the 2nd position (with the main switch switched off) must be turned
in the required direction.
Repeat the procedure until the 2nd position is set correctly.
Put the speed sensor cover back again and screw.
24
2
1
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 887 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 887 in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 887

Durkopp Adler 887 User Manual - German - 70 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info