613262
4
Zoom out
Zoom in
Previous page
1/15
Next page
1.3 Technical Specification
Machine head: Class 935 - 940 - 6
Needle system: 934 SIN
Needle thickness: Nm 90
Threads: As needle and hook thread spun monofilament
sewing yarns
Stitch type: 401 double chain stitch
Number of stitches: 3200 / min (recommended number of stitches
ex works)
Stitch length: 2.5 mm for rear feed dog (fixed setting)
Transport length for forward feed dog and
transport foot adjustable up to 6 mm
Stitch condensation: 1.5 mm
Operating pressure: 6 bar
Air consumption: approx. 0.5 NL per work cycle
Nominal voltage: 1 x 220 - 240 V, 50 / 60 Hz
Dimensions: (H x W x D) 1600 x 1530 x 951 mm
2. Operation
2.1 Threading the Needle Thread (Upper thread)
Caution Risk of Injury !
Turn main switch off.
Thread the upper thread only with the machine switched off.
Place the thread spool 1 on the thread stand.
Guide the thread as shown through the holes and tension discs in
the thread guide plate.
Guide the thread in order through guide plate 3, thread guide 4,
thread tension 8, thread guide 6 and thread drawing plate 7.
Guide the thread through thread guide 13 and thread drawing lever
12.
Guide the thread through pre-tension 9, thread guide 10 and
needle eye. Cut off the excess thread end.
2.2 Threading the Hook Thread (Lower Thread)
Caution Risk of Injury !
Turn main switch off.
Thread the lower thread only with the machine switched off.
Place the thread spool 2 on the thread stand.
Guide the thread as shown through the holes and tension discs in
the thread guide plate.
Guide the thread in order through the guide plate 3, thread guide
4, thread tension 5 and lower thread guide 19.
Feed the thread through the slot (see arrow) in the thread gutter 18.
Remove cover plate 11 and swing holder 14 up out of its catch.
Guide the thread through thread guides 15 and thread drawing
hook 16.
Swing holder 14 back and allow to catch.
Pull the thread through the hook 17 with a tweezers and pull tight.
Insert cover plate 11 again.
6
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 550-12-12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 550-12-12 in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 550-12-12

Durkopp Adler 550-12-12 User Manual - German - 15 pages

Durkopp Adler 550-12-12 User Manual - French - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info