613283

Durkopp Adler 527 Manual

10
Zoom out
Zoom in
Previous page
1/34
Next page
6
7. Machine maintenance
Caution!
Before cleaning and lubricating the machine switch off the main switch and put your your feet off the pedals on the
stand to avoid starting the machine by treading the pedal.
7.1 Cleaning
Maintain the machine clean and at least once a day (according to the processed material) remove dirt from the hook and feeder
space by means of a brush, with the machines provided with a thread cutter, from the cutting space as well. Avoid using volatile
liquids for cleaning purposes, they damage the machine and the health too. Check up the filtering sieve on the electric motor for
not being choked with dust.
7.2 Lubrication (Fig. 11, 12, 13)
For lubricating the machine use Esso SP-NK 10 oil or another oil of the same quality (viscosity at 40° C: 10 mm
2
/s; inflammation
point: 150°C). Before starting the stitching operation, put one oil drop into the holes marked with red colour on the machine
(Fig. 12, 13). Check up specially the oil level on the oil level gauge (1) for lubricating the hook. Refill oil through the hole (2) above
the oil level gauge only when the oil lever considerably sinks below the middle of the oil level gauge.
From time to time, oil is to be dropped into the hole of the hook gearbox (Fig. 13). The quantity of the oil fed for lubricating the
hook is regulated by turning a bit a regulation pin (3) using a screwdriver within the extent of 0 - MAX, that is to the left, in
counterclockwise direction. The pin is placed on the front side of the oil vessel under the bedplate. When setting the indicator
of the regulation pin on “0”, the minimum oil feeding to the hook is ensured, so that its seizure is avoided. After having put the
machine into operation, check and refill regularly the oil level in the oil vessel at the hook and in the oil vessel on the machine arm.
It is necessary to refill ESSO BEACON EP2 grease in the shafts of the feeding mechanism (4, 5).
Fig. 13Fig. 12
3
Fig. 11
5
4
12
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 527 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 527 in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 527

Durkopp Adler 527 User Manual - German - 34 pages

Durkopp Adler 527 User Manual - French - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info