613308
7
Zoom out
Zoom in
Previous page
1/29
Next page
5. Operation
5.1 Threading the needle thread
Caution - danger of injury
Turn off the main switch.
The needle thread may only be threaded with the sewing
machine at a halt.
Thread the needle thread as shown in the illustration.
5.2 Adjusting needle-thread tension
Preliminary tension 1
On the
467-183081
machine the needle thread needs to be under residual tension for
the thread cutter to function reliably when the main tensioner 3 is open.
The preliminary tension 1 should be set lower than the main tension 3.
Adjust preliminary tension 1 by rotating the Knurled nut.
After major changes to preliminary tension 1 the main tension 3 should also be
adjusted accordingly.
Main tension 3
The main tension 3 should be set as low as possible.
The looping of the threads must be in the centre of the material (see fig. a).
With thin material excessive thread tension can cause unwanted gathering and thread
breakage.
Adjust the main tension 3 so that the stitches are uniform.
5.3 Opening the needle-thread tensioner
Automatic
The main tensioner 3 is opened automatically:
when the thread is severed (sub-class
467-183081
).
Manual
The main tensioner 3 is opened manually:
when button 2 is pressed.
The main tensioner 3 remains open for as long as button 2 is held down.
when the sewing feet are raised with the knee lever (see chapter 5.8).
when the sewing feet are arrested in the up position (see chapter 5.9).
9
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 467-180 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 467-180 in the language / languages: English as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 467-180

Durkopp Adler 467-180 User Manual - German - 29 pages

Durkopp Adler 467-180 User Manual - French - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info