613308
28
Zoom out
Zoom in
Previous page
1/29
Next page
9.1.3 Sewing
In the description of the sewing, the following preconditions are assumed:
Special sewing machine with thread trimmer (Subclass 467-183081) and
electropneumatic seam bartacking and sewing foot lift (RAP 13-4).
The following functions are set on the control panel:
Beginning and end bartack: ON
Sewing foot position before and after trimming: DOWN
Needle position before trimming: DOWN (position 1)
The last sewing sequence was completed with end bartack and thread trimming.
Operation and function sequence during sewing:
Sewing sequence Operation / Remarks
Before
the start of sewing
Initial position
Position the material at
the seam beginning
- Pedal in the rest position. Sewing machine is
stopped.
Needle up. Sewing feet down.
- Press key 3.
The needle positions in the low position.
- Step the pedal half back.
The sewing feet lift.
- Push the material toward the needle.
- Release the pedal.
The sewing feet lower onto the material.
At the seam beginning
Beginning bartack and
continue sewing
Only sew beginning bartack
Not
sewing the beginning bar-
tack
- Step the pedal forward and hold down.
The beginning bartack is sewn.
Then the machine continues sewing with the rpm
determined via the pedal.
- Step the pedal briefly forward.
The machine stops in the 1st position (needle
down) after the sewing of the beginning bartack.
- Press key 2 (bartack suppression).
- Step the pedal forward. The machine sews with
the rpm determined via the pedal.
1 2 3
30
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 467-180 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 467-180 in the language / languages: English as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 467-180

Durkopp Adler 467-180 User Manual - German - 29 pages

Durkopp Adler 467-180 User Manual - French - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info