613310
24
Zoom out
Zoom in
Previous page
1/35
Next page
2
Motors are chosen according to the following table:
* Control panel S359 600038/V810 or S359 600050/V820 it is possible to order for setting the stop motor, however, it is
not included in supply of the stopmotor and it has to be ordered separately.
Above mentioned stop motors were tested in the machine and they meet functional requirements. Other types
of stop motors can have but need not have suitable parameters. Producer does not recommend using the other
stopmotor without testing.
2.4 Motor pulley
By stopmotor EFKA DC 1600/DA82GA is revolutions are set continuously by electronics.
With machines where working with a high twisting moment is necessary due to sewing heavy materials (sewing category
3 and 4) the manufacturer recommends using pulley ø 42 (M 048).
The diameter of the motor pulley in mm must be by asynchronous motors according to the following quotation:
Diameter of pulley = 71 x
sewing speed (st/min)
motor revolutions (rev./min)
The smallest diameter of pulley is 42 mm considering used V-belt. Belt cover on the motor limits the biggest diameter
of pulley to 127 mm.
The pulley for the maximum or other sewing speed will be supplied on express wish of the customer.
Motor pulley diameter
Sewing speed of machines: standard
1)
Mains voltage frequency: 50 Hz
1)
When the customer will not order anything else, he will get a pulley for standard sewing speed. Owing to a limited
assortment of pulleys, the effective sewing speed may slightly differ from that declared and quoted in the column.
2
) The table gives effective pulley diameter which is by 4 to 5 mm lower than the outer diameter.
Note.: The effective diameter of the hand wheel pulley is 71 mm.
Machine Ordered Name Diameter Machine rev. Approx. specification
subclass number of pulley max./min
50 Hz/60 Hz
X11 S359 600030 63 FIR 1148 63 2500/3000 asynchronous clutch motor; switch-circuit breaker
X21 S359 600030 50 3 x 400/230 V, 50 2000/2400 with cabling; connection material
S359 600030 42 2800 RPM, 50 Hz 42 1600/2000
S359 600031 75 FIR 1147F 75 1500/1800 asynchronous clutch motor; switch-circuit breaker
S359 600031 63 3 x 400/230 V, 63 1200/1500 with cabling; connection material
S359 600031 42 1400 RPM, 50 Hz 42 800/1000
X12 S359 600045 810 Stopmotor EFKA 58 adjustable DC motor (AC servo) control panel V810;
X22 DC 1600/DA82GA mains switch with cabling; connection material
X4X 1 x 230 V, 50/60 Hz
X5X S359 600045 820 58 adjustable DC motor (AC servo) control panel V820;
mains switch with cabling; connection material
S359 600052 63 Stopmotor EFKA * 63 2500/3000 asynchronous stopmotor with friction clutch and
S359 600052 50 VD 552/6F82FA 50 2000/2400 brake; switch-circuit breaker; connection material
S359 600052 42 3 x 400/230 V, 42 1600/2000
2800 RPM, 50/60 Hz
S359 600056 75 Stopmotor EFKA * 75 1500/1800 asynchronous stopmotor with friction clutch and
S359 600056 63 VD 554/6F82FA 63 1200/1500 brake; switch-circuit breaker; connection material
S359 600056 42 3 x 400/230 V, 42 800/1000
1400 RPM, 50/60 Hz
Ordered number/motor pulley diameter
2)
Model Sewing EFKA DC 1600/ EFKA VD 552/ FIR 1148/552/3 EFKA VD 554/ FIR 1147F/554/3
speed DA82GA 3312 6F82FA 6F82FA
(SPM) 4000 RPM 2800 RPM 2800 RPM 1400 RPM 1400 RPM
4280-2XX-100 2500 S359 600045 810/ø 58
S359 600052 63/ø 63 S359 600030 63/ø 63 - -
-200 2500 S359 600045 820/ø 58
4280-6XX-100 2500 S359 600052 63/ø 63 S359 600030 63/ø 63 - -
-200 2000 S359 600045 810/ø 58 S359 600052 50/ø 50 S359 600030 50/ø 50 - -
-300 1200 S359 600045 820/ø 58 - - S359 600056 63/ø 63 S359 600031 63/ø
63
-400 800 - - S359 600056 42/
ø 42 S359 600031 42/ø 42
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 4280i - 6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 4280i - 6 in the language / languages: English as an attachment in your email.

The manual is 1,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 4280i - 6

Durkopp Adler 4280i - 6 User Manual - German - 35 pages

Durkopp Adler 4280i - 6 User Manual - French - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info