634054
20
Zoom out
Zoom in
Previous page
1/32
Next page
6.14 Roller Top Feed
The feed distance of the roller top feed is a max. 7 mm.
It can be set differently than the bottom feed with the setting dial 2.
The feed roller 3 is automatically lowered after 10 stitches. The number of stitches prior
to the automatic lowering of the feed roller can be set with parameter F-186 (technician
level).
The feed roller 3 is automatically raised during lifting of the sewing foot and at seam
bartacking.
Hand lever 1 up:
The feed roller with drive is completely swung out of the work area. The roller top
feed (puller) has no function.
Hand lever 1 down:
The puller is swung into the work area.
Operate switch 4:
The feed roller is raised or lowered.
LED 5 ON = Feed roller raised.
LED 5 OFF = Feed roller lowered.
Set the setting dial 2.
The feed distance of the roller top feed can be set independent of the bottom feed.
12
34
4
5
22
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 381 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 381 in the language / languages: English as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 381

Durkopp Adler 381 User Manual - German - 32 pages

Durkopp Adler 381 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info