634054
19
Zoom out
Zoom in
Previous page
1/32
Next page
6.13 Turning the Needle Bars On and Off
The needle bars can be turned off with lever 1.
The position of lever 1 determines which needles are working:
Lever 1 in the left position.
Left needle bar turned off (right needle bar is working).
Lever 1 in the right position.
Right needle bar turned off (left needle bar is working).
Lever 1 in the middle position.
Both needle bars are working.
The needle bar is arrested in its high position. The lever 1 must therefore be operated
in standstill (down) or during the upward movement, before the needle bar lies 3 mm in
front of its high position.
If switching occured too late, then the handwheel must be turned back a suitable
distance. During the subsequent forward turn the needle bar is then arrested in the high
position.
Turning the switched-off needle bar on again:
Press switch 2.
The lever 1 moves into the middle position by itself.
The switched-off needle bar is turned on again. It follows the working needle bar
when this has reached its high position.
The switch must be operated in needle low position or during the upward movement so
that the switched-off needle bar can follow the working needle bar by the next stitch.
If switching occured too late, then the handwheel must be turned back a suitable
distance. During the subsequent forward turn the needle bar is coupled in.
1
2
21
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 381 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 381 in the language / languages: English as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 381

Durkopp Adler 381 User Manual - German - 32 pages

Durkopp Adler 381 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info