633982
34
Zoom out
Zoom in
Previous page
1/48
Next page
2-8
Define needle zero-position
1. Position the cursor on the icon of the needle zero position.
2. Turn the hand wheel with impetus in the set turn direction until the angle
value below the turn direction icon changes.
3. Turn the hand wheel, until the needle stands at the top edge of the stitch
plate.
4. Press the Plus key to accept the value as zero position.
5. Press the Special key to leave the page or continue with the setting of the
needle top and bottom position.
Define needle top and bottom position
These positions are defined as a factory setting but can be modified:
1. Position the cursor on the stroke „II. Pos.“.
2. Turn the hand wheel into the set turn direction, until the needle stands in
the desired top position.
3. Read the angle value below the turn direction icon (est. 80).
4. Press the Plus or Minus key to enter the displayed value into the entry box
beside the stroke „II Pos.“.
5. Position the cursor on the stroke „I Pos.“.
6. Press the Plus or Minus key to enter the value „160“ into the entry box
beside the stroke „I Pos.“.
7. Press the Special key to leave the setup page.
3.4.2 Revs (min. and max.)
Pull: 75
5400
[6500]
MAX.:
MIN.: 400
DEC.
80%
ACC.
100%
RESET
ON
SETUP-02
Position the cursor on all sections listed below and set the recommended
values using the Plus or Minus key:
MAX.: 5400
MIN.: 400
ACC. 100 %
DEC. 80 %
Pull: 75
Press the Special key to leave the setup page.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 1281-4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 1281-4 in the language / languages: English as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 1281-4

Durkopp Adler 1281-4 User Manual - German - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info