633982
32
Zoom out
Zoom in
Previous page
1/48
Next page
2-6
3 Programming instructions and machine setup
As a factory setting, 2 sewing programs (4 if the machine is equipped with a
pinking mechanism) are contained in the memory of the machine, which can
be selected and used by the operator. These programs had been program-
med based on long experience and should be sufficient for the use of the
machine. The available programs are described in the first part of this manu-
al.
Existing programs can be modified and adjusted to your personal require-
ments. You can also program completely new sewing programs. All modified
or new programs can be copied on a storage module for data recovery
purposes.
3.1 General hints
If you want to set or modify certain functions, you have to place the cursor
using the arrow keys on the icon of the function and change the setting using
the Plus/Minus keys.
At several functions you can press the Special key to open a setup page for
the specific function.
The machine setup can be modified on the following pages:
Setup -01 Machine type
Setup -02 Position actor, turn direction, needle position, revs, acceleration
curve of the foot pedal, cover page, storing of error messages,
enable access code
Setup -03 Presser foot, photo cell
Setup -10 Inputs and outputs
3.2 Selection of the setup pages
1. Position the cursor on the program number and press the Minus key. This
will be displayed:
: 6500
[ ]
XXX
DEUTSCH
000
PROG.
2. Position the cursor on the left-handed „x“ below the key symbol.
3. Press the Minus key to change the „x“ to a zero.
4. Position the cursor on the middle „x“ and press the Minus key.
5. Position the cursor on the right-handed „x“ and press the Minus key.
6. Position the cursor on the program number 000 and press the Minus key.
Setup page -01 will be displayed.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 1281-4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 1281-4 in the language / languages: English as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 1281-4

Durkopp Adler 1281-4 User Manual - German - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info