793660

Dunlop Concept 2500 Manual

5
Zoom out
Zoom in
Previous page
1/11
Next page
ASSFMBLY !àISTRUCTIONS : HOMETRATNER CONCEPT 2SOO
l. Attach the front foot (2) and the back foot (l) to the main body (1) using bolts ({), washers (7) and nuts
(§). Tighten using a spanner.
2. Attach the saddle stem (9) to the saddle (8) using nylon nuts and washers, and tighten using a spanner.
3. Slide the saddle stem ínto main body and pull seat adjustment knob (18) to select desíred height. Always
ensure knob is screwed and fitted tightly.
4. Release locking clip (ft) by pulling resistance band (13) ensuring band does not come completely out of clip.
Connect the resistance adjustment cable (14 and the resistance band and spring(i3), then connect the
computer cables (l§) in one, pull the cable out of the top of the handlebar stem for connection with the
computer. Then fit the handlebar stem (l!) to the main body(l) using the domed socket bolts (i0 and
washers fl/1. Tighten the bolts. Ensure all cables are tucked inside the handlebar stem. With tension knob i
@ set at minimum pull resistance band upwards so that the flywheel turns freety and re-tighten the
locking clip. I
5. Slide the handlebar (19) into the handlebar holder, then tighten with the butterflyknob (fitted). Fit the
handlebar grips (24 to the handlebar (put a little soapy water for easier assembty), and insert the small
plastic caps into the handlebar pipe.
6. Fit the computerQJ) to the handlebar stem bracket and insert the plug into the computer. lnsert the
earclip into the pulse terminal.
7. ldentify the left and right hand pedals 129;. Attach the right hand pedal to the right crank on the main
body and tighten by turning in clockwise direction. The left hand pedal must be fitted to the left hand crank
and tighten by turning in an anticlockwise direction.
TIPS
l. Follow this assembly manual carefully.
2. Make sure all bolts and nuts are securily tightened, using the provided locking washers.
3. This hometrainer has been designed for a long and unproblematic use. Please check all bolts and nuts
regular and apply lubrication to moving parts regular.
CAUTION
1. Do not wear loose fitting clothing that could become entangled in any moving parts.
2, Do always wear shoes when you exercise.
3. Keep the unit out of reach for children.
4. children should not be in the immediate area when the unit is being used.
5. Consult your physian before starting any exercise program.
6. Stop exercising immediately in case of nausea, shaking, shortness of breath, pain in the chest or
headache.
7. Do not exercise 45 minutes before eating or J hour after eating.
INSTRUCTIOI|S MONTTOR
Functions buttons
l.ilODE
SET
RESET
ST/STOP
Press to select each mode.
Set target values time, distance, calorie, and pulse.
One-touch for single function value reset. lf hold on the button for values of all functions
reset.
Press to start or stop the operation of functions.
-5-
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dunlop Concept 2500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dunlop Concept 2500 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 6.54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info