783580
10
Zoom out
Zoom in
Previous page
1/13
Next page
18 19
REPLACEMENT PARTS
The Classic toaster is also kind on the environment, all parts are repairable or replaceable. You
don’t throw away a Dualit Classic toaster, for a nominal cost we x it for you!
Dualit repairs department regularly receive toasters over 40 years old. They are xed and
go back to the owner in full working order. If your toaster needs a repair, simply contact our
helpline on 01293 652 500 for repair or servicing advice or visit www.dualit.com/support.
ALL SERVICING MUST BE CARRIED OUT BY A QUALIFIED ELECTRICIAN
OR REPAIRER.
For your own protection only use original Dualit spares in your toaster.
Fitting of non Dualit parts will invalidate the guarantee.
ELEMENT SPARES
When replacing ProHeat elements, only use genuine Dualit elements
(stamped “DUALIT”).
The safety and the performance of the toaster cannot be guaranteed if inferior
elements are used.
TIMER SPARES
When replacing the timer, only use a genuine Dualit timer.
The safety and the performance of the toaster cannot be guaranteed if an inferior timer
is used.
RESETTING THERMAL FUSE
If the toaster neon illuminates, but the elements fail to warm up or if there is an audible
‘click’ above the normal ticking of the timer from the toaster while it is still operating, you may
have activated the Thermal Protection Device.
Before resetting you must ensure that there is not a fault within the appliance. Do not reset
unless a qualied electrician has examined the toaster and veried that the Selector Switch,
Timer and all other Components are in good working order.
The Thermal Protection Device can be reset by allowing the toaster to fully cool, unplugging
the toaster from the wall socket and following instructions below.
Resetting the Thermal Protection Device should only be carried out by a qualied
electrician. The toaster must be Portable Appliance Tested following reset of the
Thermal Protection Device. Should you require any further assistance call Dualit’s Service
Department on 01293 652 500.
DON’T FORGET
TO REGISTER
YOUR PRODUCT
WWW. DUALIT.COM/REGISTER
OR BY POST
1 2
Unplug the toaster
and allow to fully cool.
Remove the crumb tray and
toaster base plate to access
the fuse.
3
The fuse can be located
in the rear corner of the
toaster body.
The appliance must be
Portable Appliance Tested
before use.
PAT
TEST
4
The fuse is reset by
depressing the small white
button on its face.
Rex the base plate and return
the crumb tray.
56
U
N
P
L
U
G
W
H
E
N
N
O
T
I
N
U
S
E
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dualit Classic Toaster at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dualit Classic Toaster in the language / languages: English as an attachment in your email.

The manual is 11.08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Dualit Classic Toaster

Dualit Classic Toaster User Manual - German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish - 47 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info