657632
20
Zoom out
Zoom in
Previous page
1/68
Next page
Installation manual207.2.4 Back wall connecting to the glass of the side pane(see fig. 7-8 and 7-9)When installing the wall up to the side pane, proceed as follows:1Make sure the back wall to be placed has the correct dimensions (see fig. 7-8).1Loosen the self-tapping screws of the vertical decorative strip by a few turns and adjust the profiles to the correct distance. The distance depends on the thickness of the wall. For material thickness 20 mm and 30 mm, indicators have been applied. The cover plate is no longer required and can be removed. Re-tighten the self-tapping screws (see fig. 7-9).1Maintain a 5 mm distance between the wall and the side pane.3-In case of a 2-sided appliance, construction on the glass of the side pane is only possible at the back wall side, not at the side wall side. It has to be possible to remove the front glass pane. For this purpose, it should be possible to remove the decorative strip.-In case of materials up to the glass, it is important to maintain a 5 mm minimum distance from the glass!-In case of materials up to the glass, heat-resistant material should be used that is at least able to resist a temperature of 85°C.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DRU Maestro 80-3 RCH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DRU Maestro 80-3 RCH in the language / languages: English as an attachment in your email.

The manual is 7.09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DRU Maestro 80-3 RCH

DRU Maestro 80-3 RCH Installation Guide - German - 68 pages

DRU Maestro 80-3 RCH User Manual - Dutch - 28 pages

DRU Maestro 80-3 RCH Installation Guide - Dutch - 44 pages

DRU Maestro 80-3 RCH Installation Guide - French - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info