Installation manual187.2.3 Placement of bracket with gas control and accessories below the platform3If, when placing with a platform, there is no room for the control hatch, the bracket with gas control must be placed directly under the platform using the 'electricity protective cabinet' accessory.Place the bracket with gas control and accessories below the platform using the supplied protective cabinet (see fig. 7-7).1Place the attachment bracket (A) against the back wall using suitable fastening materials. Make sure the top of the bracket connects to the platform;3It is not allowed to place the bracket under the appliance.1Loosen the bracket with gas control and accessories (B) from the appliance and attach it to the attachment bracket (A) using the previously removed self-tapping screws.3Never allow the bracket with gas control and accessories to remain attached to the appliance and remove the transportation bracket.1Position the gas pipe on the recess (1) in the protective cabinet, it is aligned with the connection on the gas control.1Connect the gas pipe as described in section 6.3.1Place the data plate (C) in the bracket in the bottom of the protective hood (D).1Hook the protective hood into bracket (A) and fasten it with the self-tapping screw.1Guide the flexible gas pipe that leads to the burner through the recess (2).1Guide the cables through the protected recess (3).3Make sure the cables of the ionization pin and spark electrode do not make contact with metal parts. These may also not make contact with signal and voltage cables.1Use cable ties to fasten cables and pipes.3-There are 230V of mains voltage on the gas unit, and this must be guarded.-Carefully observe the necessary safety instructions that also apply to the control hatch (see section 7.5).
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for DRU Maestro 80-3 RCH at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of DRU Maestro 80-3 RCH in the language / languages: English as an attachment in your email.
The manual is 7.09 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
