Installation manual371Identify logs A to K (see fig. 8-9).2-Use the burn stains on the logs for identification.-In the overview photograph, the side glass pane is located on the right side.1Place log A over the lying burner in the positioning brackets (see fig. 8-20).1Place log B on the left side behind log A, in the two positioning brackets and on log A.1Place log C on the right side behind log A, in the positioning bracket and on log A, make sure there is 1 centimetre play between log C and the standing burner to the right (see fig. 8-20).1Place log D in the positioning bracket to the right and on log C.1Place log E against the tube of the standing burner to the right and in the positioning bracket.1Place logs F and G in front of the lying burner, in the positioning brackets.1Place log H against the tube of the standing burner to the left and in the positioning bracket.1For appliances without Eco Glow, use all chips in the wood set.1Fill the vermiculite plates with chips, spread the chips evenly, keep the sections marked in red free of chips (see fig. 8-18).1For appliances with Eco Glow, use the glow rocks, coals, 400ml of the supplied grey chips and 800ml of the black chips.2First place the Glowing embers and then the coals. Switch on the glow lighting while placing, so that the stray light can be seen directly and covered with the rocks and coals.1Spread the Glowing embers over the grid pattern and square holes in the vermiculite plate, keep the sections marked in red free (see fig. 8-19).1Spread the chips over the remaining sections, keep the sections marked in red free.1Place log I on the left side in front of log A, in the positioning bracket and on log A.Make sure there is 1 centimetre play between log I and the standing burner to the left (see fig. 8-23).1Place log J over the standing burner to the left, make sure the recess falls over the burner properly.1Place log K over the standing burner to the right, make sure the recess falls over the burner properly.2Spread the ash over the chips and/or place the glow material over the lying burner in separate tufts.3-Prevent the ash from ending up on the burners.-Only place the glow material on sections that are marked green.-The areas around the ionization and ignition should remain free from glow material (see fig. 8-15).-The glow material may affect the colour of the flame picture.2Place chips on the edge of he pane frame. Prevent chips from getting under the pane frame (see fig. 8-16 and 8-17).8-14
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for DRU Maestro 75 RCH at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of DRU Maestro 75 RCH in the language / languages: English as an attachment in your email.
The manual is 5.63 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
