Installation manual358.3 Placing the wood setThe appliance is supplied with a wood set.3The figures do not always show the correct colours.3Observe the instructions below to prevent unsafe situations:-Only ever use the supplied wood set.-Place the wood set exactly as described.-Make sure the ionization and ignition electrodes and the surrounding space remain free(see fig. 8-7 and 8-8).-Prevent the fine vermiculite dust from ending up on the burner.3Place the logs exactly as described, otherwise:-The main burner will not ignite properly; which could result in unsafe situations.-The appliance will become filthy more quickly, as a result of soot.-The flame picture is affected.8.3.1 Wood setThe wood set consists of a number of logs (see fig. 8-9), vermiculite (see fig. 8-10), chips (see fig. 8-11), glow material (see fig. 8-12) and ash (see fig. 8-13).2For Eco Glow appliances, an extra set of Glowing Embers is supplied (see fig. 8-14).3It is not possible to completely cover the Eco Glow openings in the plate around the burner, which means there is a risk of scattered light. This can be prevented as much as possible by the correct placement of Glowing Embers, coals and chips. Scattered light can also originate under, above and next to the appliance. Take this into account when designing the chimney breast.Eco Glow appliances have a different type of base covering to appliances without Eco Glow.3- The vermiculite plates are provided with square holes, which ensure air supply. Do not place more than one layer of base covering over these holes.-Ensure that the base covering does not enter the slot for the glass pane.1Fill the lying burner with vermiculite; evenly spread the vermiculite (see fig. 8-15). The vermiculite should not get higher than the edge of the burner.2You can influence the flame picture by moving the vermiculite.3-The vermiculite should not get higher than the edge of the burner.-The burner deck has to remain covered with vermiculite in order to prevent reduction of the burner's life span.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for DRU Maestro 75 RCH at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of DRU Maestro 75 RCH in the language / languages: English as an attachment in your email.
The manual is 5.63 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
