810271
60
Zoom out
Zoom in
Previous page
1/64
Next page
Installation manual
60
Appendix 1: Malfunctions
Malfunctions
Error code
F01
F02
F03
F05
F06
54
F08
Problem
Communication loss between
receiver and ESYS
Receiver overheated
(60° above room temperature)
Internal (receiver) NTC sensor
does not work correctly
Internal safety error
Communication loss between
transmitter and receiver
Safety error transmitter
No ionization
Possible cause
Communication cable does
not make contact
Communication cable defective
Poor ventilation at receiver
Receiver makes contact
with hot parts
Receiver defective
Receiver defective
Transmitter is out of
the receiver's range
Obstacles between transmitter
and receiver that could interfere
with the signal
Transmission strength is too weak
Communication loss too long (F06)
No sparks
No gas
Poor flame transfer main burner
No good flame under ionization pin
(suffocating flame)
Ionization pin placed incorrectly
Ionization pin blocked
(measure ionization current
when > 0 and < 1.8 uA)
Ionization pin defective
(measure ionization current when 0)
Remedy
Make sure the connectors
of the communication cable
make proper contact
Replace communication cable
Improve ventilation at receiver
Move receiver in such a way
that there is no more contact
with hot parts
Replace the receiver
Replace the receiver
Make sure the transmitter is
near the receiver
Remove possible obstacles
between transmitter and
receiver
Check transmission strength
(see User Manual chapter 10)
Register transmitter again
Make sure the distance between
the electrodes is 3-4 mm
Replace the spark electrodes
Check whether there is gas
When using PowerVent®,
check that the gas valve opens
Check position of blocks/chips
If necessary, remove dust from
burner openings
Glass pane strips not
placed correctly
Check restriction and
air inlet guide setting
When using PowerVent®,
check pressure setting
Place it on the right location.
Remove any vermiculite or
chips from the burner
Replace the ionization pin
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DRU Maestro 105 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DRU Maestro 105 in the language / languages: English as an attachment in your email.

The manual is 6.2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DRU Maestro 105

DRU Maestro 105 User Manual - German - 28 pages

DRU Maestro 105 User Manual - Dutch - 64 pages

DRU Maestro 105 User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info