571624
15
Zoom out
Zoom in
Previous page
1/44
Next page
English
INSTALLATION MANUAL
5.16 Wood set
The appliance is supplied with a wood set.
!Caution
Strictly observe the following instructions to prevent unsafe situations:
Ø
Only ever use the supplied wood set;
Ø
Only use the glow material (see appendix 3, fig. 14) in combination with the wood set;
Ø
Place the wood set exactly as described;
Ø
Make sure the ionization and spark electrodes and the surrounding space remain free
(see appendix 3, fig. 12 and 13);
Ø
In case of a wood set, keep the air openings between the burner and the vermiculite tray completely free;
Ø
Make sure there is no vermiculite's dust on the burner.
5.16.1 Placing the wood set
The wood set consists of a number of logs (see appendix 3, fig. 15), black vermiculite (see appendix 3, fig. 12) and
chips (see appendix 3, fig. 13) .
!Caution
The figures do not always show the correct colours.
Ø
Fill the burner with vermiculite and evenly spread the vermiculite (see appendix 3, fig. 16).
!Tip
You can influence the flame picture by moving the vermiculite.
!Caution
The vermiculite should not get higher than the edge of the burner;
The burner deck has to remain covered with vermiculite in order to prevent reduction of the burner's life
span.
Ø
Identify logs A to E (see appendix 3, fig. 15)
!Caution
Log E only applies to the Lugo 80.
!Tip
Use the burn stains on the logs for identification;
When placing the logs, use the positioning cams.
Ø
Place log A behind the burner against the positioning brackets (see appendix 3, fig. 17).
Ø
Place log B over the burner on the positioning bracket of the burner. Use the recess in the burner and keep the
ignitions free for the correct position of this log (see appendix 3, fig. 18).
Ø
Place log C against the positioning bracket and on log B (see appendix 3, fig. 19).
Ø
Place log D against the positioning bracket and on log B (see appendix 3, fig. 19).
Ø
In case of Lugo 80, place log E in the positioning bracket and on log B (see appendix 3, fig. 21).
!Caution
The logs should not block the burner cartridge and the ionization pens and ignition plugs should remain free,
because:
The main burner will not ignite properly; which could result in unsafe situations;
The appliance will become filthy more quickly, as a result of soot;
The flame picture will be affected.
Ø
Fill the vermiculite tray with chips; spread the chips evenly (see appendix 3, fig. 20 (Lugo 70) and fig. 22 (Lugo 80)).
!Caution
Do not place chips on the open area around the burner and keep the ionization pens and ignition plugs free,
because:
The main burner will not ignite properly; which could result in unsafe situations;
The appliance will become filthy more quickly, as a result of soot;
The flame picture will be affected.
Ø
If required, spread the glow material over the burner.
!Caution
The areas around the ionization and ignition should remain free from glow material.
!Tip
Fasten the glow material under chips and/or wood set.
15
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DRU Lugo 80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DRU Lugo 80 in the language / languages: English as an attachment in your email.

The manual is 4.96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DRU Lugo 80

DRU Lugo 80 User Manual - English - 28 pages

DRU Lugo 80 User Manual - German - 28 pages

DRU Lugo 80 Installation Guide - German - 44 pages

DRU Lugo 80 User Manual - Dutch - 28 pages

DRU Lugo 80 Installation Guide - Dutch - 44 pages

DRU Lugo 80 User Manual - French - 28 pages

DRU Lugo 80 Installation Guide - French - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info