571624
12
Zoom out
Zoom in
Previous page
1/44
Next page
English
INSTALLATION MANUAL
5.10 Additional instructions
The construction frame above cannot be adjusted afterwards.
If it concerns the free-standing Lugo 70/3 Module, please use the supplied manual for the construction of the
Lugo 70/3 Module. After that, the installation will be continued from chapter 5.14.
Ø
Attach the appliance to the wall by means of wall brackets (A) (see appendix 3, fig.1).
!Tip
Extension legs are available for this appliance.
5.11 Suspended placement of appliance
It is possible to suspend this appliance from a wall:
Ø
Determine the position and height of the appliance (see appendix 3, fig. 1 and 2a).
Ø
Attach the wall bracket (B) to the wall using the supplied key bolts.
!Caution
Attach the appliance to a vertical wall of solid, non combustible and heat-resistant material.
Ø
Use the slotted holes of the wall bracket to level.
Ø
At the bottom, unscrew the 2 adjustable feet (C) with lock nuts from the appliance and place them at the back of
the appliance.
Ø
Place the appliance in the wall bracket, wall bracket (A) will hook into wall bracket (B).
Ø
Use the adjustable feet (C) to level the appliance vertically, and lock them with the nuts.
5.12 Platform
The appliance should be placed with a platform, this can be in combination with lower decorative strip or adjacent
to the glass, the accompanying chimney breast can be used with or without a false wall (see appendix 3, fig. 2b).
!Caution
Use non combustible and heat-resistant material;
Do not allow the weight of the platform to rest on the appliance, therefore use the separately available
assembly set.
5.12.1 Platform combined with lower decorative strip (see appendix 3, fig. 2b (D)):
Ø
Create a recess in the platform in which the appliance will be placed, if a false wall (F) is used, the recess will be less
deep;
Ø
Mutually adjust the height of the appliance and assembly set, so that the top side of the platform connects to the
bottom side of the lower decorative strip.
5.12.2 Platform adjacent to the glass (see appendix 3, fig.2b (C)):
Ø
Create a recess in the platform in which the appliance will be placed, if a false wall (F) is used, the recess will be less
deep, the maximum material thickness is 30mm :
Ø
Remove the lower decorative strip (see appendix 3, fig. 2c (A)) by sliding it to the front and removing it, it will not
be placed back;
Ø
Unscrew the nuts (B) of the adjustment profiles (C) by a few turns and adjust the profiles to the correct height, this
will depend on the material thickness of the platform, indicators (D) have been applied for 20mm and 30mm
material thicknesses. Re-tighten the nuts (B);
Ø
Mutually adjust the height of the appliance and assembly set, so that the bottom side of the platform connects to
the adjustment profiles.
!Caution
Do not allow the weight of the platform to rest on the appliance/adjustment profile;
Make sure there is sufficient space for placing and removing the vertical decorative strip, we recommend a
clearance of 1 mm between the platform and the bottom side of the vertical decorative strip.
5.12.3 Placement of bracket with gas control plus accessories below the platform.
Place the bracket with gas control plus accessories below the platform using the supplied protective cabinet
(see appendix 3, fig 4a);
Ø
Place the attachment bracket (A) against the back wall using suitable fastening materials. Make sure the top of the
bracket connects against the platform.
!Caution
It is not allowed to place the bracket under the appliance.
Ø
Loosen the bracket with gas control plus accessories (B) from the appliance and attach it to the attachment
bracket (A) using the previously removed self-tapping screws;
!Caution
Never allow the bracket with gas control plus accessories to remain attached to the appliance and remove the
transportation bracket.
Ø
Position the gas pipe on the recess (1) in the protective cabinet, it is aligned with the connection on the gas
control.
12
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DRU Lugo 80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DRU Lugo 80 in the language / languages: English as an attachment in your email.

The manual is 4.96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DRU Lugo 80

DRU Lugo 80 User Manual - English - 28 pages

DRU Lugo 80 User Manual - German - 28 pages

DRU Lugo 80 Installation Guide - German - 44 pages

DRU Lugo 80 User Manual - Dutch - 28 pages

DRU Lugo 80 Installation Guide - Dutch - 44 pages

DRU Lugo 80 User Manual - French - 28 pages

DRU Lugo 80 Installation Guide - French - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info