810284
22
Zoom out
Zoom in
Previous page
1/40
Next page
English
INSTALLATION MANUAL
UK
F08
(follow-up)
F12
F13/F14
F15
F16
F17
ESYS is not released
(ionisation <0.8 µA) Flame
loss when only the main
burner (F13) is on or both
burners (F14) are on
No burner device (see "C" in
appendix 3, fig. 38)
High limit error
Hardware Error ESYS
Disable contact is closed
Error messages
Ionization pin
defective (measure
ionization current when 0)
ESYS is in hard-lock
Ionisation pin short-circuited
Ionisation current too critical
(0.8 ≤ Iionisation < 1.8 µA)
Suffocation due to poor flue
gas channel
Suffocation when using
PowerVent
24 hour check control (only
in case of F13)
Gas has fallen away
Gas control defective
(see "A" in app. 3, fig. 38)
Burner device came loose
from burner device
Burner device incorrectly
mounted
Pins on the connector on the
gas control are bent
High limit bridge defective
ESYS defective (burner
device)
Window is open.
(if this contact is present)
A bridge has been made
across the Disable contact.
Replace the ionization
pin
Wait half hour until ESYS
resets itself.
Remove chips, vermiculite or
glow material lying against
the ionisation pin
Increase ionisation current to
≥ 1.8 µA by rearranging
vermiculite, and removing
chips and dust from the
burner openings
Check the concentric system
Check the setting of the
appliance
Check the pressure setting of
the PowerVent system
Reset with remote control
(consult Powervent manual)
Check gas supply
Replace the gas control
Attach the burner device
Mount the burner device
correctly
Bend them straight
Check High limit bridge ESYS
Replace ESYS (burner device)
Close window
Remove bridge on ESYS
(burner device)
Error code Problem Possible cause Remedy
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DRU Cosmo Tunnel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DRU Cosmo Tunnel in the language / languages: English as an attachment in your email.

The manual is 8.69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DRU Cosmo Tunnel

DRU Cosmo Tunnel User Manual - English - 28 pages

DRU Cosmo Tunnel User Manual - German - 28 pages

DRU Cosmo Tunnel Installation Guide - German - 40 pages

DRU Cosmo Tunnel User Manual - Dutch - 28 pages

DRU Cosmo Tunnel Installation Guide - Dutch - 40 pages

DRU Cosmo Tunnel Installation Guide - French - 40 pages

DRU Cosmo Tunnel User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info