810284
21
Zoom out
Zoom in
Previous page
1/40
Next page
English
INSTALLATION MANUAL
21
Appendix 1 Malfunctions
F01
F02
F03
F04
F05
F06
F08
Communication loss
between receiver and
burner device
Receiver overheated (60°
above room temperature)
Internal (receiver) NTC sensor
does not work correctly
External NTC sensor,
does not work correctly
Internal safety error
Communication loss
between transmitter
and receiver
No ionization
Error messages
Communication cable does
not make contact
Communication cable
defective
Poor ventilation at receiver
Receiver makes contact with
hot parts
Receiver is defective
External NTC sensor
or cabling defective.
Receiver is defective
Transmitter is out of the
receiver's range
Obstacles between
transmitter and receiver may
interfere with the signal
Transmission power is too
weak
No sparks
No gas
Poor flame transfer main
burner
No good flame under
ionization pin
(suffocating flame)
Ionization pin placed
incorrectly
Ionization pin blocked
(measure ionization flow
when > 0 and < 1.8 uA)
Make sure the connectors of
the communication cable
make proper contact
Replace communication cable
Improve ventilation at
receiver
Move receiver in such
a way that there is no more
contact with hot parts
Replace the receiver
Replace NTC sensor
or replace cabling
Replace receiver
Make sure the transmitter is
near the receiver
Remove possible obstacles
between transmitter and
receiver
Check transmission power
(see User Manual chapter 10)
Make sure distance between
electrodes is 3-4 mm
Replace spark electrodes
Check whether there is gas
When using PowerVent, check
whether the gas valve opens
Check position blocks/chips
If necessary, remove dust
from burner openings
Glass pane strips not
placed correctly
Check restriction and air inlet
guide setting
When using PowerVent, check
pressure setting
Place it on the right
location
Remove any vermiculite or
chips from the burner
Error code Problem Possible cause Remedy
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DRU Cosmo Tunnel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DRU Cosmo Tunnel in the language / languages: English as an attachment in your email.

The manual is 8.69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DRU Cosmo Tunnel

DRU Cosmo Tunnel User Manual - English - 28 pages

DRU Cosmo Tunnel User Manual - German - 28 pages

DRU Cosmo Tunnel Installation Guide - German - 40 pages

DRU Cosmo Tunnel User Manual - Dutch - 28 pages

DRU Cosmo Tunnel Installation Guide - Dutch - 40 pages

DRU Cosmo Tunnel Installation Guide - French - 40 pages

DRU Cosmo Tunnel User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info