810284
15
Zoom out
Zoom in
Previous page
1/40
Next page
English
INSTALLATION MANUAL
5.14 Placing the wood set
The appliance is supplied with a wood set.
!Caution
The figures do not always show the correct colours.
Before placing the wood set in a Cosmo Tunnel RCH, first determine what is the front of the appliance. Make
sure the positions of the burners are exactly the same as indicated in figure 18 in appendix 3.
!Caution
Strictly observe the following instructions to prevent unsafe situations.
Ø
Only ever use the supplied wood set.
Ø
Place the wood set exactly as described.
Ø
Make sure the ionization pin and spark electrode and the surrounding space remain free
(see appendix 3, fig. 13 and 14).
Ø
Make sure the slot between the burner and the vermiculite tray is kept free from objects.
Ø
Make sure there is no vermiculite's dust on the burner.
5.14.1 Wood set
The wood set consists of vermiculite (see appendix 3, fig. 15), chips (see appendix 3, fig. 16) and a number of logs
(see appendix 3, fig. 17).
Ø
Fill the burners with vermiculite; evenly spread the vermiculite (see appendix 3, fig. 18). The vermiculite may not
get higher than the edge of the burners.
!Caution
You can influence the flame picture by moving the vermiculite, but the burner deck should remain covered with
vermiculite in order to avoid reducing the burner's life span.
Ø
Check whether the insulating rope around the 2 central burners has been applied correctly
(see appendix 3, fig. 18).
Ø
Check whether the ends of the insulating rope around the 2 central burners connect to each other
(see appendix 3, fig. 18).
Ø
Identify logs A to H (see appendix 3, fig. 17).
!Tip
Use the burn stains on the logs for identification.
Ø
Place logs A and B, using the positioning cams (see appendix 3, fig. 19 and 20).
Ø
Place log C, using the positioning pins (see appendix 3, fig. 21).
Ø
Continue with central log D (see appendix 3, fig. 22).
!Caution
Always place central log D with 2 people, to prevent breakage;
make sure that the space surrounding the central burners is distributed evenly, so that it is possible for
secondary air to flow around the burners;
make sure the insulating rope around the central burners properly connects to log D.
!Tip
Check the sealing by lighting it from below using a torch.
Ø
Then place the cap on the left central burner. This cap will make sure that the flame will transfer smoothly
(see appendix 3. 23).
Ø
Place log E (see appendix 3, fig. 24).
Ø
Fill the vermiculite tray with chips; spread the chips evenly (see appendix 3, fig. 25).
Ø
Identify logs F to H (see appendix 3, fig. 26).
!Caution
The logs may not completely cover the burner pattern (see appendix 3, fig. 27), because:
the main burner will not ignite properly; which could result in unsafe situations;
the appliance will become filthy more quickly, as a result of soot;
the flame picture will be affected.
15
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DRU Cosmo Tunnel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DRU Cosmo Tunnel in the language / languages: English as an attachment in your email.

The manual is 8.69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DRU Cosmo Tunnel

DRU Cosmo Tunnel User Manual - English - 28 pages

DRU Cosmo Tunnel User Manual - German - 28 pages

DRU Cosmo Tunnel Installation Guide - German - 40 pages

DRU Cosmo Tunnel User Manual - Dutch - 28 pages

DRU Cosmo Tunnel Installation Guide - Dutch - 40 pages

DRU Cosmo Tunnel Installation Guide - French - 40 pages

DRU Cosmo Tunnel User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info