810284
14
Zoom out
Zoom in
Previous page
1/40
Next page
English
INSTALLATION MANUAL
5.13 Adjustment of the appliance
The appliance has to be set in such a way that it works correctly in combination with the used discharge system.
For that purpose, it is possible to place a restrictor slide.
The conditions for using a wall terminal and roof terminal can be found in appendix 2,
tables 4, 5 and 6.
5.13.1 Restrictor slide
The restrictor slide (R) must be adjusted to the right position (see Appendix 3, fig. 10).
Proceed as follows:
!Caution
The restrictor slide should be placed in the correct manner. Therefore, accurately observe the instructions in
Appendix 3, fig. 10.
Ø
Loosen the 3 self-tapping screws by a few turns.
Ø
Adjust the position of the restrictor in accordance with tables 4, 5 and 6.
In the restrictor slide, 4 of the 5 possible positions are indicated by means of the 4 cut out letters B up to E.
Ø
Make sure that the point of the triangle belonging to the position that you want and the centre of the self-tapping
screw are exactly aligned.
Ø
Now tighten the 3 self-tapping screws.
At position A, the restrictor slide should be fully removed from the combustion chamber.
Proceed as follows:
Ø
Remove the 3 self-tapping screws of the restrictor slide from the combustion chamber (see appendix 3, fig. 10).
Ø
Remove the restrictor slide (R).
Ø
Screw back the self-tapping screws in the combustion chamber.
!Caution
The self-tapping screws of the restrictor slide must have been screwed back in the combustion chamber.
!Tip
If you are installing an appliance, whereby a wood set has to be placed, do not yet place back the glass pane.
14
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DRU Cosmo Tunnel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DRU Cosmo Tunnel in the language / languages: English as an attachment in your email.

The manual is 8.69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DRU Cosmo Tunnel

DRU Cosmo Tunnel User Manual - English - 28 pages

DRU Cosmo Tunnel User Manual - German - 28 pages

DRU Cosmo Tunnel Installation Guide - German - 40 pages

DRU Cosmo Tunnel User Manual - Dutch - 28 pages

DRU Cosmo Tunnel Installation Guide - Dutch - 40 pages

DRU Cosmo Tunnel Installation Guide - French - 40 pages

DRU Cosmo Tunnel User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info