801276
26
Zoom out
Zoom in
Previous page
1/72
Next page
26
Instructions for use ST4D 2G / ST4D 2G PLUS
Drive Medical GmbH & Co. KG | As per: 04.05.2020 | Errors and alterations excepted
EN
Number of
blinks Error Eect on the
scooter Comments
1Battery weak Scooter slow The charge status of the batteries is low. Charge the
batteries as soon as possible.
2 Battery voltage is too low Driving is not
possible
The charge status of the batteries is empty. Charge
the batteries as soon as possible. Check the battery,
connections, and cables.
3 Battery voltage is too high Driving is not
possible
The charge status of the batteries is too high. Causes
can include excessive charging and/or descending a
hill (since in this case the batteries are automatically
charged). When descending a hill, reduce the speed
in order to not charge the battery further. Switch the
scooter o and back on.
4Time limit for maximum
current limit exceeded or
control unit too hot
Driving is not
possible
The scooter has consumed too much current for an
overly long period of time, which could be attributed to
an excessive load, jamming, or the throttling of the motor.
Switch the scooter o and wait a few minutes before
switching it on again. The control unit has discovered a
short circuit in the motor. Check the cable harness for
short-circuited electrical circuits and check the motor.
Contact your customer service.
5Brake error Driving is not
possible
Check whether the gearshift lever for the parking brake
is in the locked position. The brake coil or the cables
of the parking brake are defective. Check the parking
brake and the cables for short-circuited electrical circuits
or exposed cables. Contact your customer service.
6 Driving is blocked Driving is not
possible
A STOP function is enabled or a charge blocking has
occurred. Disable the STOP function and separate the
charging unit from the scooter. Bring the control lever
into a neutral position and switch the scooter o and
back on. The control lever may need to be recalibrated.
Check the cables of the control lever.
7Error of the rotational
speed potentiometer
Driving is not
possible
The control lever or its cable is defective. Check
exposed cables or short-circuited electrical circuits. The
control lever could be incorrectly adjusted. Contact your
customer service.
8Motor voltage error Driving is not
possible
The motor or its cable is defective. Check exposed
cables or short-circuited electrical circuits. Contact your
customer service.
9Other defect Driving is not
possible
The control unit may be internally defective. Check
exposed cables or short-circuited electrical circuits.
Contact your customer service.
If the red LED in the battery display is blinking, the error can be determined using the blink code:
Error code description control unit Rhino 2
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Drive ST4D 2G PLUS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Drive ST4D 2G PLUS in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 6.77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info