801276

Drive ST4D 2G PLUS Manual

23
Zoom out
Zoom in
Previous page
1/72
Next page
Instructions for use ST4D 2G / ST4D 2G PLUS
23
Drive Medical GmbH & Co. KG | As per: 04.05.2020 | Errors and alterations excepted
EN
Charging the battery
Read the enclosed instructions for use of the charging
unit. If the scooter is not used for a longer period of
time, ensure that the batteries are charged at least once
permonth to avoid deterioration of the condition of the
battery.
Changing the batteries
It is normal for the battery capacity to decrease over time,
even if the battery is always charged as described above.
When the battery performance reaches only 60% of its
former capacity, we recommend changing the battery.
Continued use of the old batteries leads to a rapid reduc-
tion of the range of the electric scooter and can lead to
significant wear of other electric scooter parts. It is rec-
ommended to replace the batteries in pairs and to obtain
them from your dealer.
Installation and removal of the batteries
Ensure that the electric scooter is switched o.
Remove the seat.
Take the battery cover o.
Separate the battery connections (B).
Remove the Velcro straps (A) from the battery and take
the batteries out (C).
Installation in the reverse order.
Ensure that the batteries are connected properly!
Battery care
You should charge the batteries after every time you use
the electric scooter in order to ensure the maximum bat-
tery range. The batteries should be charged at least once
per month, even if the electric scooter is not being used.
After charging or inserting a new battery, drive the elec-
tric scooter a short distance to ensure that the battery
capacity is sucient.
In cold environments, the battery may react more slowly
and the range is shortened accordingly. When traveling
on inclines and slopes, the battery display fluctuates. This
is a normal process.
The battery range is reduced when driving over inclines
or uneven surfaces since the electric scooter needs more
power.
The batteries should not be charged for more than 24
hours. The batteries are maintenance-free and should
accordingly not be filled with water. The batteries should
be regularly checked to ensure they are clean. For infor-
mation about this, please read the section of this manual
below.
Cleaning the battery
If the batteries become contaminated with water, battery
acid, dust, or other substances, they discharge faster. The
batteries provided with the electric scooter are sealed
and as such, they are maintenance-free and leak-proof.
Follow the steps below to clean the battery.
Ensure that the electric scooter is switched o.
Remove the seat and the battery cover.
Use a clean cloth to clean the soiled surfaces.
Take the battery out.
Clean the battery with a clean cloth. If the terminals are
covered with a white powder, wipe them using some
warm water.
Warning:
The cables for the electrical system, charging unit, and
batteries are already properly laid in the factory. Do not
attempt to lay the cables yourself. Improperly laying the
cables can cause the cables to become pinched in the
battery compartment which in turn can lead to a failure of
the electrical system. Ensure that the battery cables are
connected at the correct battery poles. A connection dia-
gram can be found underneath the battery compartment
cover.
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Drive ST4D 2G PLUS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Drive ST4D 2G PLUS in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 6.77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info