801302
18
Zoom out
Zoom in
Previous page
1/48
Next page
18
Instructions for use ROTEC
Drive Medical GmbH & Co. KG | As per: 28.04.2021 | Errors and alterations excepted
EN
Adjusting and using
the hand brake (optional)
Upon delivery, the optio-
nal hand brake is correctly
adjusted for the attendant.
If braking is insucient,
this can be increased by
unscrewing the adjusting
screw and decreased by
screwing in the adjusting
screw (photo 23).
For adjustment, first remove the locking nut and then
perform the corresponding adjustment; thereafter re-
tighten the locking nut and in doing so, use pliers to hold
the adjusting screw. To brake the wheelchair by the at-
tendant, pull up both brake handles at the hand grip.
To apply the brakes (such as for parking), you can lock the
brake handle in the braking position by simply pushing
the locking mechanism forwards with your finger until it
snaps into place; to unlock, push the locking mechanism
back (photo 24+25).
24 25
If you need to step away from the wheelchair while it is
occupied, it is essential to additionally apply the parking
brake.
Operating the tilting aid
To maneuver around
curbstones and over
thresholds step firmly
(with the left or right foot)
on the tilt aid while simul-
taneously pushing down
the handles. This ensures
that lifting the front of the
wheelchair is easier. En-
sure that you are standing
securely (photo36).
Collapsing
For easier transport or for stowing in motor vehicles, the
wheelchair can be collapsed with just a single maneuver.
To do this, first remove the optional seat cushion as well
as the footrests, then grasp both looped handles loca-
ted at the side of the seat surface cushion and pull the
wheelchair upwards (photo 27+28).
27 28
Extending the wheel base
If necessary, the wheel
base can be extended by
80 mm. To do this, take the
hand rim wheel o and re-
move both screws on the
wheel mount fork. This can
now be rotated 180° and
moved backwards. Rein-
sert and tighten screws.
The parking brake now
only needs to be adjusted
to the new position; this is
done as described in the
chapter “Adjusting the parking brake! If the wheelchair
is equipped with a hand brake, the brake plate must be
unscrewed and then screwed back on again beforehand
(photo 29).
This adjustment should be performed only by the
specialist dealer!
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Drive Rotec at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Drive Rotec in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 8.52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info