Manual Drive PowerStroll (page 16 of 44) (English, German, Dutch, French, Italian)

801304

Zoom out

Zoom in

1/44

Instructions for use POWERSTROLL

Drive Medical GmbH & Co. KG | As per: 04.05.2021 | Errors and alterations excepted

Relief strap

The PowerStroll pushing

aid is supplied with a

relief strap so that the

wheelchair can also be

moved without the Po-

werStroll. Lift the device

with the red pull cord and

place the loop around the

push handle (photo 15).

Battery

Follow the instructions below step by step:

Charging the battery

1. Switch o the pushing aid.

2. Remove the battery.

3. Insert the round plug of the charging unit into the

charging socket of the battery.

4. Insert the power cord of the charging unit into the

outlet.

5. The LED of the charging unit is lit and red when the

battery is being charged. The charge time is about

8 hours, depending on the charge status of the bat-

tery. For optimal performance, a charge time of 12

hours is recommended.

6. The LED changes from red to green when the bat-

tery is fully charged.

7. Switch o the charging unit, unplug the power cord,

and pull the round plug out of the battery pack.

Battery care

1. Unplug the charging cable only after the battery has

been fully charged. The service life of the battery

shortens drastically if the battery is repeatedly used

when not fully charged. Therefore ensure that the

battery is fully charged each time.

2. Always charge the battery until the LED changes

from red to green. NEVER interrupt the charging

process before it has been completed.

3. When the battery is fully charged, the charging unit

starts maintenance charging to ensure an optimal

range.

4. If the pushing aid is not used for a longer period of

time, charge the battery at least once per month in

order to keep the battery in a fully charged state at

all times.

5. The environmental temperature has an eect on the

charge time and capacity of the battery. The range

is decreased at cold temperatures and the charge

time is increased.

6. Do not leave the charging plug inserted in the bat-

tery if the charging unit is unplugged since this

drains the battery and the range is reduced.

7. Only use the charging unit supplied and fully charge

the battery each time. The battery can become

damaged if a charging unit which does not meet the

speciﬁcations is used.

8. Do not disassemble or modify the charging unit.

9. Charge the battery in a well-ventilated room where

the battery is not exposed to direct sunlight. Do not

charge the battery in a damp or wet environment.

10. Do not charge the battery at temperatures below

-10°C or over +50°C since such temperatures can im-

pair the function of the charging unit and the battery

can become damaged.

11. During charging, keep the battery away from ﬂam-

mable objects and open ﬂames, since the battery

could ignite or burst.

12. Do not smoke during charging since the battery can

release hydrogen gas. Always charge the battery in

a well-ventilated room.

13. During charging, never disconnect or connect the

plug or the cable with wet hands; if they are wet, this

can lead to an electrical shock.

14. The battery warranty is good for six months. This

warranty applies only to manufacturing errors and

not to errors which can be attributed to incorrect

charging not in accordance with the instructions.

Charging unit

The charging unit supplied has an LED which changes

color depending on the charge status:

• If the LED is lit and RED, the charging unit is switched

on and charging.

• If the LED is lit and GREEN, the charging unit is

switched on, the majority of the charging has been

completed, and the battery can be used. However, it

is recommended to leave the charging unit to continue

charging for several more hours after the green LED

appears. The battery performance is maintained or

increases as a result.

• The LED is also lit and GREEN if the charging unit is

switched on but not connected to the battery.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Drive PowerStroll in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 4.28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Drive PowerStroll Manual

Product: