801301
16
Zoom out
Zoom in
Previous page
1/52
Next page
16
Instructions for use LITEC 2G PLUS
Drive Medical GmbH & Co. KG | As per: 11.05.2021 | Errors and alterations excepted
EN
Overcoming obstacles with an attendant
Getting up onto the sidewalk
The attendant positions the wheelchair facing forward
in front of the sidewalk. He/she then tilts the wheelchair
backwards towards him-/herself until the steering
wheels reach up onto the sidewalk; he/she pushes the
wheelchair forward until the rear wheels are at the edge
of the curb and pushes the wheelchair further until the
rear wheels roll over the edge of the curb.
Getting down o the sidewalk
The attendant positions the wheelchair facing forward
with the steering wheels at the edge of the curb and tilts
it backwards towards him-/herself. Then he/she careful-
ly pushes the wheelchair forwards until the rear wheels
touch the street, then he/she gradually lowers the stee-
ring wheels to the ground.
Getting over stairs
Since it is diffi cult to get over stairs, we recommend get-
ting assistance from two attendants, one in front of the
wheelchair and one behind the wheelchair at the push
handles. The attendant who is positioned behind the
wheelchair tilts it backwards towards him-/herself while
holding the handles fi rmly. The attendant who is posi-
tioned in front of the wheelchair holds the front lateral
frame fi rmly and lifts the chair over the stairs while the
other person places one foot on the next stair and re-
peats the step.
Do not lower the steering wheels of the wheelchair until
the attendant positioned in front of the wheelchair has
crossed the last stair. To go down stairs, the same proce-
dure as described above should be followed, in reverse
order.
Lifting the wheelchair
with hoists
If the wheelchair needs to
be lifted with a gantry cra-
ne, for example, to over-
come obstacles, only the
4 points on the frame of
the wheelchair which are
identifi ed with a hook sti-
cker may be used as lifting
points (photo 1).
Do not attempt to lift the wheelchair by grasping any re-
movable parts (for example, the armrests, leg supports
or foot supports). Avoid using an escalator.
Traveling on inclines by independent wheelchair users
We recommend avoiding ramps with an incline of more
than 9°. In the case of larger inclines, there is a risk of
tipping over if the wheels spin or when approaching an
incline at an oblique angle.
Going up ramps
Lean your upper body forward and operate the hand
rims with rapid pushes to reach an appropriate speed.
If you want to stop to rest along the way, the two brakes
must be operated simultaneously.
Going down ramps
Lean your upper body backwards and use the hand rims
which slide through your hands to control the speed and
direction.
Avoid sudden direction changes, never attempt to as-
cend or descend a ramp diagonally, and do not attempt
to turn the wheelchair when ascending. The wheelchair
is not suitable as a seat for driving a vehicle.
Take note of the permitted maximum weight of the user.
This information can be found in the technical data in
these instructions for use as well as on the identifi cation
plate.
Protect the product from direct sunlight
Product parts can become hot and cause skin injuries if
touched.
Every serious incident which occurs in connection with
the product must be reported to the manufacturer and
the competent authority of the member state in which
the user and/or patient is located.
Preparing for use
Attach wheels and unfold
Insert the hand rim wheels into the hole provided in the
Varioblock by pressing the release button in the center
of the hub. Ensure that the wheel is properly locked af-
ter insertion; check this by pulling outwards (photo 2+3).
Now unfold the wheelchair by pressing on the seat sur-
face until it noticeably clicks into place.
Hanging the footrests
Hang both footrests provided as shown and swivel them
inwards until they audibly click into place (photo 4). To
release the footrests, press the lever inwards and swivel
the footrests to the side (photo 5).
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Drive Litec 2G Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Drive Litec 2G Plus in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 7.85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info