595086
7
Zoom out
Zoom in
Previous page
1/17
Next page
13 14
D USING THE MICRO SD CARD
The Drift HD can take micro SD or SDHC cards of up to 32GB in size.
Inserting and Removing the Micro SD Card
1. Turn the camera o.
2. Unscrew and remove the rear hatch (anti-clockwise movement).
3. Insert the Micro SD card into the memory card slot, as shown. Carefully push it all
the way in until it clicks into place.
5. Replace the rear hatch of the camera and tighten the screw (clockwise movement)
back to its original position.
4. To remove the SD card if needed, push the card until it clicks and then pull the card
out.
Note: The Drift HD cannot record any video or photo les without a memory card.
Formatting the Micro SD Card
It is possible to delete all the data on a memory card by formatting it. When using a
new memory card for the rst time, formatting is recommended.
1. Press the MENU button to open the Main Menu.
2. Highlight the Setup icon and press the SELECT button.
3. Highlight the Format option on the Setup Menu and press the SELECT button.
4. Confirm that you want to format the card by highlighting the tick icon and pressing
SELECT button. The formatting process will take several seconds. Please be patient
during this process.
Note: Formatting the Micro SD card does not delete your custom preferences, such as
resolution, menu language, FPS or screen brightness.
Note: The recording times in the table below are an approximation. Actual recording
times for Micro SD cards will vary depending on the recording conditions.
Approximate Recording Time
1080p HD 720p HD WVGA (SD)
1 GB 11 mins 24 mins 42 mins
2 GB 22 mins 49 mins 1h 24 mins
4 GB 44 mins 1h 38 mins 2h 48 mins
8 GB 1h 24 mins 3h 15 mins 5h 36 mins
16 GB 2h 55 mins 6h 30 mins 11h 11 mins
32 GB 5h 51 mins 13h 00 mins 22h 22 mins
! Ensure that the camera is powered o
when inserting and removing a memory
card. The card and the data may be
damaged if inserted or removed while
the camera is turned on.
! Once the card is formatted, this cannot
be undone. Ensure any files you wish
to keep have been copied onto your
computer, as all data on the SD card will
be lost once formatted.
preparing for use
E REAR HATCHES
The Drift HD comes with two dierent hatches, for distinct purposes:
Regular Rear Hatch
The regular Rear Hatch is used most when no cables are connected to the camera. As
this hatch makes the camera water-resistant, we advise you to use this model of hatch
when the camera will be exposed to water splashes or employing the waterproof case.
Connector Hatch
The Connector Hatch must be only used when the camera will be connected to an
external audio input or an external power source. When using this hatch, the camera is no
longer water resistant, and any contact with water must be avoided. The two openings in
the hatch are designed for the USB cable and the mono audio input cable (2.5mm).
F REPLACING THE LENS
In order to follow the procedure below, you must have a Drift Replacement Lens Kit in
hands (not included).
1. Using the hex key, gently remove the four screws that hold the lens glass protector.
2. Remove the black frame that holds the lens.
3. Remove the old lens from the frame, including the washer.
4. Taking the new pieces of the kit, insert the lens on the frame, and the washer just
behind the lens.
5. Position the frame on its original place, and gently tighten the screws.
Note: For more details on where to purchase a Drift HD Lens Replacement Kit, please
visit www.driftinnovation.com.
Rear Hatch
Connector Hatch
Lens Replacement Kit
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Drift HD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Drift HD in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Drift HD

Drift HD Quick start guide - English - 9 pages

Drift HD Quick start guide - German - 9 pages

Drift HD User Manual - French - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info