488598
15
Zoom out
Zoom in
Previous page
1/88
Next page
15
Wood should be cut at high speed.
Iron or steel should be cut at high speed.
If a high speed steel cutter starts to vibrate, it usually
indicates that it is running too slow.
Aluminium, copper alloys, lead alloys, zinc alloys and tin
may be cut at various speeds, depending on the type of
cutting being done. Use a paraffin (not water) or other
suitable lubricant on the cutter to prevent the cut material
from adhering to the cutter teeth.
NOTE: Increasing pressure on the tool is not the answer when it is
not performing properly. Try a different accessory or speed setting
to achieve the desired result.
MAINTENANCE
Preventative maintenance performed by unauthorized personnel
may result in misplacing of internal wires and components which
could cause serious hazard. We recommend that all tool service
be performed by a Dremel Service Facility. To avoid injury from
unexpected starting or electrical shock, always turn off powertool
before performing service or cleaning.
CLEANING THE TOOL
TURN OFF TOOL BEFORE CLEANING
Ventilation openings and switch levers must be kept clean and
free of foreign matter. Do not attempt to clean by inserting
pointed objects through openings.
The tool may be cleaned with compressed air. Always wear
safety goggles when cleaning tool with compressed air.
There is no need to lubricate the Dremel multitool.
Certain cleaning agents and solvents will damage plastic parts.
Some of these are: gasoline, carbon tetrachloride, chlorinated
cleaning solvents, ammonia and household detergents that
contain ammonia.
Clean the "grip" areas of the tool using a damp cloth. Tougher
soiled areas may require more than one wipe application to get
clean.
SERVICE AND WARRANTY
This DREMEL product is guaranteed in accordance with
statutory/country-specific regulations; damage due to normal
wear and tear, overload or improper handling will be excluded
from the guarantee.
In case of a complaint, send the tool undismantled together with
proof of purchase to your dealer.
CONTACT DREMEL
For more information on the Dremel assortment, support and
hotline, go to www.dremel.com
Dremel Europe, P.O. Box 3267, 4800 DG Breda, The Netherlands
ÜBERSETZUNG DER ORIGINAL-
BEDIENUNGSANLEITUNG
VERWENDETE SYMBOLE
LESEN SIE DIESE HINWEISE
TRAGEN SIE GEHÖRSCHUTZ
TRAGEN SIE AUGENSCHUTZ
TRAGEN SIE EINE STAUBMASKE
ALLGEMEINE SICHERHEITSHINWEISE
FÜR ELEKTROWERKZEUGE
!
WARNUNG
LESEN SIE SÄMTLICHE
SICHERHEITSHINWEISE UND
ANWEISUNGEN
Die Nichtbeachtung der folgenden Sicherheitshinweise und
Anweisungen kann zu elektrischem Schlag, Feuer und/oder
schweren Verletzungen führen.
Bewahren Sie alle Sicherheitshinweise und Anweisungen
zum künftigen Nachschlagen auf.
Der in den Sicherheitshinweisen verwendete Begriff „Elektro-
werkzeugbezieht sich auf netzbetriebene Elektrowerkzeuge
(kabelgebunden) und auf akkubetriebene Elektrowerkzeuge
(kabellos).
SICHERHEIT AM ARBEITSPLATZ
a. Halten Sie Ihren Arbeitsbereich sauber und aufgeräumt.
Unordnung und unbeleuchtete Arbeitsbereiche können zu
Unfällen führen.
b. Arbeiten Sie mit dem Gerät nicht in explosions-
gefährdeter Umgebung, in der sich brennbare
Flüssigkeiten, Gase oder Stäube befinden.
Elektrowerkzeuge erzeugen Funken, die den Staub oder die
Dämpfe entzünden können.
c. Halten Sie Kinder und andere Personen während der
Benutzung des Elektrowerkzeugs fern. Bei Ablenkung
können Sie die Kontrolle über das Gerät verlieren.
ELEKTRISCHE SICHERHEIT
a.
Der Anschlussstecker des Gerätes muss in die Steckdose
passen. Der Stecker darf in keiner Weise verändert
werden. Verwenden Sie keine Adapterstecker gemeinsam
mit schutz
geerdeten Geräten. Unveränderte Stecker und
passende Steck
dosen verringern das Risiko eines elektrischen
Schlages.
DE
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dremel 7700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dremel 7700 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 4,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info