32309

Dremel 1680 Manual

15
Zoom out
Zoom in
Previous page
1/64
Next page
15.
Mounting the Scroll Saw
SCROLL SAW BASE
1/2” Foam Pad or
Carpet (optional)
WORKBENCH
HEX HEAD
BOLT
FIG. 14
FIG. 13
5/16”
Dia.
6 1/4
”
FLATWASHER
LOCKWASHER
HEX NUT
JAM NUT
16 3/4”
Mounting the Scroll Saw
to a Bench
1. The Scroll Saw should be fastened securely to a firm
supporting surface such as a stand or workbench, using
the four mounting holes.
Note: When mounting this saw to a workbench, a solid
bench is preferable to a plywood bench where noise and
vibration will be more noticeable.
We recommend to reduce noise and vibration, that a soft
foam pad be placed between your Scroll Saw and work-
bench. (Not Supplied)
Quantity Description
1 Soft foam pad, such as carpet padding,
24”x12”x1/2”
2. When mounting the Scroll Saw to a workbench, holes
should be drilled through the foam pad or carpet and
mounting surface of the workbench using the dimensions
illustrated in Figure 13.
Each of the four mounting holes should be bolted secure-
ly using no less than 1/4” hex bolts, flat washers, lock
washers, and nuts. We recommend:
Quantity Description
4 Hex Head Bolts,
1/4”-20 x 1/4”-20 x Length Required
4 Flat Washers, 9/32” I.D.
4 Lockwasher, 9/32” I.D.
8 Hex Nuts, 1/4”-20
(Hardware not supplied)
A. Locate and mark where the Scroll Saw is to be mount-
ed.
B. Drill the four 5/16” holes through the workbench.
C. Place the Scroll Saw on the workbench aligning holes
in the base with the holes drilled in the workbench. Insert
all four (4) screws and tighten.
Note: Do NOT overtighten mounting bolts - leave some
cushion in the foam pad for absorbing noise and vibra-
tion.
ATTENTION: When inserting the front right hex head bolt,
it will be necessary to insert the hex head bolt from the
bottom side of the workbench, and secure with hex nut
from the top side of Scroll Saw Base.
Example of mounting this Scroll Saw to workbench (Fig.
14).
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dremel 1680 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dremel 1680 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info