768206
39
Zoom out
Zoom in
Previous page
1/52
Next page
14.0 MAINTENANCE
R699820 - Yunzi Series User Manual 39
a) Turn On the unit.
b) Browse into the menu Function => Reset Lamp Time.
c) Confirm time reset.
Alternative method in standby mode, using the remote control.
a) Plug this unit to Main power.
b) When the projector is in standby mode (red STANDBY/ON led), use the remote control and press sequentially
the [BACK] - [OK] - [HIDE] within 1 second interval then [DOWN] for at least 2 seconds.
c) The sequence is successful if the STANDBY/ON and LAMP leds blink alternately for 3 seconds.
14.4 Cleaning and Replacing the Dust Filters
The filters must be cleaned regularly to allow an efficient air intake. Otherwise, dirt may enter the unit and
appear on the screen, preventing you from enjoying the video fully. If dirt has entered the unit or if you need
information about the filter, please consult your authorized dealer. A filter cleaning warning appears every
500 hours.
Cleaning procedure
Pull out the power plug from the outlet while the projector is in standby mode.
Push up and lift the claw of the filters, pull out the filters.
Clean the filters with water and dry them, avoiding direct sunlight. In extremely soiled cases, use of a neutral
detergent is recommended. Insert the filters in their original positions and make sure that the claws are firmly
inserted.
14.5 Troubleshooting
CAUTION DURING RESET
Reset the lamp time only when you have replaced the lamp.
Never reset it when the lamp is still in use. Otherwise, the approximate standard for gauging replacement time may
be inaccurate, lamp performance may deteriorate and lamp blowout may occur.
ID# Operating LED Description
STANDBY /
ON LAMP
orange LED WARNING
red LED Blinking
1 red - - - Unit is in standby mode
2 green - - - Unit is in operate mode (during projection)
3blinking
green - - Yes Unit is in operate mode, but HIDE is ON.
Press again on HIDE button to obtain a
picture.
4 blinking red - - Yes Unit is in cooldown mode. (switching off)
Dust Filter
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DreamVision Yunzi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DreamVision Yunzi in the language / languages: English as an attachment in your email.

The manual is 2,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info