768206
40
Zoom out
Zoom in
Previous page
1/52
Next page
15.0 MISCELLANEOUS
40 R699820 - Yunzi Series User Manual
15.0MISCELLANEOUS
15.1 RS-232C protocol
Serial communication specifications
Control of this unit is possible using a computer or automation device connected with a RS-232 cross cable (female
- female D-sub 9 pins cable) or LAN/ RJ-45 cable. Communication specifications for this unit are as follows:
ID# Operating LED Description
STANDBY /
ON LAMP
orange LED WARNING
red LED Blinking
5/6 - orange - - Lamp time has reached 2900 hours and/or
prepare to replace the lamp before 4000
hours.
7
-blinking
orange continuous
red
1 time The lamp failed to ignite, restart the
projector after a complete cooldown cycle.
8 2 times Lamp has shut down during projection,
restart the projector after a complete
cooldown cycle.
9 3 times Lamp cover is open. Check that the lamp
cover is firmly closed and restart the
projector.
10
- - blinking
orange
1 time Power Supply failed.
11 2 times Cooling fans stop.
12 3 times Internal thermal sensor detects
overheating.
13 4 times External thermal sensor detects
overheating.
14
-blinking
orange blinking red
1 time Startup or drive circuits failed
15 2 times Communication with drive circuit failed.
16 3 times Scaler circuit failed
17 4 times Electrical lens cover failure.
ABOUT WARNINGS AND COOL-DOWN MODE
After projection or when a warning occurred (cases 7-16), the unit will go through a 1 minute cool-down process
known as the Cool Down mode. This function is to prevent lamp breakage and shortened lamp life but also damage
to the internal components of the projector.
The Cool Down mode is indicated by the blinking red STANDBY/ON led. When in Cool Down mode, the projector
cannot be turned ON. After the Cool Down process is completed, the unit will automatically switch to the Standby
mode indicated by a red STANDBY/ON led.
CAUTION
When in Cool Down mode, do not pull out the plug from the outlet. Also, do not block the air inlets/exhaust vents by
standing the projector on its end or laying it on its side.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DreamVision Yunzi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DreamVision Yunzi in the language / languages: English as an attachment in your email.

The manual is 2,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info